Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Forks & Suspension

Fox Racing Shox 34 Step-Cast Factory Series 29-inch 120mm
$1,459.00
The 34 Step-Cast Factory Series is the choice for riders who want an all-around fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. "Factory" says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, and ultra durable Genuine Kashima Coat. These products are World Cup proven. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities
Fox Racing Shox FLOAT FLOAT X/DPX2 (1/2
$25.99
Air volume spacers are a fast and easy way of tuning your suspension. Changing the quantity of Air Volume Spacers changes the air spring curves to be more(adding spacers) or less(removing spacers) progressive through the mid-stroke and bottom-out resistance If your sag is set properly on your bike but you're either using too much travel, or you would like a bit more support through your mid-stroke, volume spacers are a great way to customize the performance of your bike. Kit includes 5 spacers each a different volume, so you can dial in the progression.
Fox Racing Shox FOX Factory Rebuild Kit for Float Rear Shocks
$25.99
Freshen up your Fox shock. It is a fairly simple service that can greatly improve the performance of an old Fox shock and bring it back to life. This kit includes everything you will need for the service. Fox Float rebuild kit for all Fox Float shocks from 2000 until current model shocks. Includes Fox Float fluid seal lubricant Includes 2 quad rings Includes 2 O-rings Includes dust wiper Includes travel indicator O-ring Includes 4 back up rings
Fox Racing Shox FOX Float CTD/DPS Air Spring Volume Tuning Kit
$25.99
For 2013 or newer Float Shocks, 9mm Shaft Air volume spacers are a fast and easy way of tuning your suspension. Changing the quantity of Air Volume Spacers changes the air spring curves to be more(adding spacers) or less(removing spacers) progressive through the mid-stroke and bottom-out resistance If your sag is set properly on your bike but you're either using too much travel, or you would like a bit more support through your mid-stroke, volume spacers are a great way to customize the performance of your bike. Kit includes 5 spacers each a different volume, so you can dial in the progression.
Fox Racing Shox FOX Float X2 Volume Spacer kit, 3 Pairs: Clip-in, Plastic, 0.25
$14.99
Air volume spacers are a fast and easy way of tuning your suspension. Changing the quantity of Air Volume Spacers changes the air spring curves to be more(adding spacers) or less(removing spacers) progressive through the mid-stroke and bottom-out resistance If your sag is set properly on your bike but you're either using too much travel volume spacers are a great way to customize the performance of your bike.
Fox Racing Shox FOX Racing Shox Air Cap
$6.59
We all lose those little parts now and then, protect the air spring and make your bike look new Replacement alloy Valve cap from Fox for Fox Float 32 and Fox Float 34 forks.
Fox Racing Shox FOX Rear Shock Air Valve Cap, Alloy, Black
$1.31
We all lose those little parts now and then. Replacement alloy Valve cap from Fox for all rear shocks.
Fox Racing Shox Float Fluid 8oz
$25.99
Fox Float Fluid 8oz bottle, part number 025-03-003-A. SHIPPING RESTRICTION This item is classified "ORM-D" and cannot be shipped via air. It can only be shipped via ground shipping methods. If you add this item to your cart, the list of available shipping methods will be reduced. For more variety of shipping options, consider removing this item from your cart (or placing a separate order using a ground shipping method.)
Fox Racing Shox Fox 34/36/40 Crush Washer
$1.29
The Fox 34/36/40 Crush Washer seals the fork lowers and prevents oil from seeping out while simultaneously keeping dirt out. It’s designed to fit Fox 34/36/40 mm stanchion forks and sits on the damper side shaft which extends out from the bottom of the forks. SPECS Compatible with the damper side of 34/36/40 mm fox forks Made from Nylon 13mm x 15mm (inner x outer) diameter Fox part # 241-01-011
Fox Racing Shox Fox 8.2mm Crush Washer
$1.29
Crush washer (sold individually) Manufacturer Part Number: 241-01-002-C
Fox Racing Shox Fox Float Fork Volume Spacer
$2.59 - $5.99
Changing the volume spacers in your fork is an easy internal adjustment that allows you to change the amount of mid-stroke and bottom out resistance. With this you can dial in your Fox Float fork's air volume to suit your riding style.
Fox Racing Shox Fox Suspension Float Fluid (5cc Pilow Pack)
$4.29
FOX Float Fluid is the perfect Anti-Friction lube to use while performing Air Sleeve Maintenance Services on ALL FOX rear bicycle shocks. The fluid uses a blend of Fox's own anti-friction additives and Molybdenum to lubricate and protect your seals from abrasive wear and tear. Small 5cc pack is the perfect amount for Fox rear shock services.
Fox Racing Shox Kabolt Axle
$58.99
The lightweight Kabolt Axle, inspired by Geoff Kabush through the RAD program, is now available for all Fox 15QR forks. The 100mm version is 40g lighter than the standard 15QR (54% weight savings). The Kabolt is compatible with all 15QR forks and installs with a 6mm hex tool. Not compatible with 2021 Fox forks.
Fox Racing Shox Low Friction Fork Seals
$32.99 - $45.99
If you want the best, go straight to the source. These are Fox's new Low Friction seal kits — the same seals used on their premium line of "Factory Series" forks. Great hop-up for your older Fox fork, essential for your newer Fox Fork Inspect and clean and/or change every 125 hours of riding use or anually for maximum performance and fork longevity. Select the kit that matches the stanchion tube size of your Fox fork Note* - Seals do not work on older forks with "flanged" style lowers and a seal driver tool is necessary for proper installation.
No Image
$65.99 - $78.99
Replacement Quick Release Axle assembly, for Fox forks. Two options available 2016 15x100 QR 2016 15x110 QR
Fox Racing Shox SLS series Spring
$171.99
These SLS springs are a lighter weight steel spring option offered in addition to our standard steel springs. The new SLS springs from FOX are lighter than titanium springs at more affordable prices. A proprietary surface treatment and stress relief process removes residual stresses from the spring, allowing them to withstand higher stresses. Each spring is optimized by using a smaller wire diameter and fewer coils, creating a lighter spring. For 2019 FOX has developed a new line of SLS springs to optimize performance on all coil shock platforms including the newer metric and trunnion options. All 2019 SLS springs are Orange and are marked with their spring rate in lbs/in and the total travel of the spring itself in both standard and metric. 2019 SLS springs should only be paired with shocks having less travel than the travel marked on the spring itself. 2.4in/61mm Travel Springs - 7.875inx2.25in, 185mm(T)x50mm, 185mm(T)x52.5mm, 185mm(T)x55mm, 210mmx50mm, 210mmx52.5mm, 210mmx55mm, 230mmx57.5mm 2.65in/67mm Travel Springs - 8.50inx2.50in, 205mm(T)x60mm, 205mm(T)x62.5mm, 205mm(T)x65mm, 230mmx60mm, 230mmx62.5mm, 230mmx65mm 2.9in/74mm Travel Springs - 8.75inx2.75in, 225mm(T)x70mm, 250mmx70mm 3.15in/80mm Travel Springs - 9.50inx3.00in, 225mm(T)x72.5mm, 225mm(T)x75mm, 250mmx72.5mm, 250mmx75mm 3.65in/93mm Travel Springs - 10.5inx3.5in For all Spring Calculations please go to the link below - https://www.ridefox.com/fox17/help.php?m=bike&id=918 WARNING: Modification or alteration of a FOX product can cause product failure resulting in SEVERE INJURY OR DEATH. Never modify or alter ANY part of a FOX product (including coil springs, lower leg cross brace, crown, steerer, upper tubes, lower leg, air can, seat post, air volume spacers, internals, axle slit shims, axle adapters, or any other parts).
Fox Racing Shox Suspension Fluid
$10.99 - $45.99
Fox Suspension Fluid is 5wt, 10wt, 20wt and fully synthetic. Green: Used as a bath oil in all Fox Shox forks. It is also the damper oil you will need for all open bath cartridges. Red: Used solely in the older sealed cartridge forks. Gold: Is intended for 'Fit Damper' forks. 5wt Teflon Infused: Grip and Grip2 Damper-Side Bath. Fox Oil Type and Volume Chart https://www.ridefox.com/fox17/help.php?m=bike&id=1106
Fox Racing Shox 34 E-Bike Performance Series GRIP 27.5-inch
Designed to cover the wide and rapidly growing array of E-Bike riders everywhere, our E-Bike products have adapted specific tuning, branding, and FOX fork chassis options. We work with E-Bike engineers to analyze strength versus weight benefits and develop chassis choices to meet the specific needs of E-Bike usage. FIT GRIP damper technology delivers simple, intuitive adjustments and long maintenance intervals for recreational riders. E-Bike specific fork and shock (OE only) damper tuning accounts for dynamic weight transfer, seated riding technique, steeper climbing, and faster uphill speeds. - Black anodized upper tubes - FIT GRIP damper and FLOAT air spring - E-Bike-ready - Performance Series black-on-black graphics package
Fox Racing Shox Factory Series 36 FLOAT
$1,539.00
SMOOTHER STIFFER AND MORE TUNABLE THAN EVER BEFORE With all-new design inside-and-out, plus an unmatched combination of smooth performance, tunability, stiffness, and lightweight–we took the award-winning, EWS favourite and made it even better. 36 FACTORY GRIP2 FORKS Upper Tube Finish: Kashima Coat Air Channels: Yes Bleeders: Yes Axle Size: 15QR x 110 Floating Axle: Yes Rotor Size: 180 direct Post Mount, Up to 230 compatible Mud Guard Mount: Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment Air Spring: FLOAT EVOL Steerer: 1.5 Taper Starting Weight: 1965 g
Page 1 of 1