Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Tools

e*thirteen by The Hive Spider Removal Tool
$26.99
- Spider removal tool is compatible with all e*thirteen cranks that have a removable spider, and can also be used as an installation/removal tool for e*thirteen bottom brackets
Yeti Cycles Grease Gun with 3.2oz Infinity Grease
$39.99
Maintenance is an important part of keeping your bike running great. Use this grease to keep your Switch Infinity running smooth. Includes: Turq Grease Gun 3.2 OZ Grease Tube
Wolf Tooth Components 8-Bit Pliers
$94.99 - $115.99
The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. - 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut - Magnets keep all bits in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when head is bent - 8mm hex bit tested to over 40 Nm torque - Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) - Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)
Wolf Tooth Components Master Link Combo Pliers
$44.99 - $58.99
The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links
Wheels Manufacturing Inc. Bottom Bracket Socket
$88.99
Use this double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Socket is machined for 1/2-inch drive, but a 3/8-inch to 1/2-inch adapter is included so you can use it with 3/8-inch drive torque wrenches. - Compatible with all Wheels Manufacturing bottom brackets that have 48.5mm or 44mm, 16-notch spline patterns - Also compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ, Campagnolo Ultra Torque, and FSA - Machined 6061 aluminum - Anodized red
Wheels Manufacturing Inc. Small Sealed Bearing Press
$275.99
Another indispensable tool for the professional bike shop, the Wheels Manufacturing Press-2 works with bearings that have an I.D. of 10mm or smaller (most front hub sealed bearing fall in this range). It features an aluminum base with 9 open bore and over axle adapters, and a quick release skewer. - Installs sealed bearing sizes 6801, 6802, 6803, 6900, 6901, R6, 688, 608, 609 - All parts are laser etched for easy identification
Topeak Nano Torqbar
$48.99 - $52.99
The Nano TorqBar is the slimmest preset torque wrench available, but don’t let its size deceive you. It is a precision-crafted, high quality tool for either the home mechanic, professional bike shop, or your own jersey pocket. Its advanced torque limit release design consistently applies precise torque values on component bolts for safety and prevents damage to expensive carbon parts. Includes preset TorqBit and the 5 most popular tool bits (3/4/5mm hex & T20/T25 Torx).
Super B Freewheel Remover - Shimano HG With Center Pin
$11.99
For Shimano® and some of Shimano®’s disc brake system, SRAM®?SunRace®, SunTour®, Chris King®, and other cassette lockrings. With a center pin. Use with 24mm spanner.
Stan's NoTubes 2oz Tire Sealant Injector
$15.99
Stan's 2oz Tire Sealant Injector measures the desired amount of sealant then attaches to your valve stem for easy, no-mess application. And, it works on Presta and Schrader valves!
Stan's NoTubes Core Remover Tool
$13.99
Removes Presta and Schrader valve cores. CNC machined, anodized finish with laser-etched logo. Fits between spokes for quick and easy core removal. Features knurled end for a no-slip grip.
Stan's NoTubes Dart Tool
$34.99
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill
Specialized Road Tube Spool
$20.00 - $30.00 $25.00 - $30.00 Up to 20% Off
A simple, compact system to carry everything you need to fix a flat without weighing you down. - Patent pending design allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber - CO2 valve head and 2-sided tire lever snap into place for compact and secure storage - Holds a single threaded 16g CO2 cartridge - Fits up to 80mm long tube valve stems
Specialized Top Cap Chain Tool
$15.00 - $29.99 $29.99 - $40.00 Up to 63% Off
Specialized's Top Cap Chain Tool replaces your top cap and places a chain tool and spare chain quick link inside your bicycle fork's steerer tube. This way you'll never forget your chain tool. This tool can be installed in any 1-1/8th inch steerer tube that is at least 32mm deep. It's available in models that work with either aluminum or carbon steerer tubes.
Specialized Zee Cage II w/Tool - Right
$90.00
This Zee Cage II was designed with an integrated EMT Cage Mount MTB Tool that has all of the trailside necessities required to get you out of a jam on your ride. For the cage itself, you'll find it to be respectably lightweight, and to have incredible holding power for when the trails get rough. For easy bottle access, we also gave it a unique side-loading design that allows you take pulls from the right or left-hand side depending on placement. - SWAT design allows for storage and tool integration. - Reinforced composite material improves durability without adding weight. - Includes EMT Cage Mount MTB Tool with 3, 4, 5, 6, 8mm, T25 Torx, and #1 flathead screwdriver. - Right-hand loading on the down tube—left-hand loading on the seat tube. - Sleek, minimalist design with razor-sharp graphics.
Silca Hirobel Frame Clamp
$299.99
Hirobel is a specially designed clamp for bicycle repair stands that makes it easier to work on your bike. It better distributes stresses and loads through the bicycle frame, offering superior stability while eliminating possible crushing or damage to thin-walled and shaped tubing. The pressure clamps used on contemporary workstands were developed for round steel tubing more than 40 years ago, predating carbon fiber, aluminum, aerodynamic and oversized tube shapes, integrated seat masts, dropper posts, and suspension systems. These legacy designs assume your bicycle tubing to be both round and straight, and when it is not, the clamp can impart very high point loads at the clamp edges causing finish damage, internal carbon layup damage, or outright crushing of tubes on the lightest designs. With Hirobel, specially shaped, paint-friendly cones and bindings cradle the frame at the tube intersections, where wall thicknesses are higher and forces can be distributed over much larger surface areas. Adjustable and adaptable for any possible frame design, the Hirobel also allows the repair stand clamp to be located closer to the bicycle center of gravity. This improves stability and eliminates bouncing of the bike during heavier work while also locating the drivetrain consistently higher for the mechanic, improving visibility while reducing back strain.
Shimano TL-BR Professional Disc Brake Bleed Kit
$109.99
Shimano Genuine Professional disc brake bleed kit Includes: - TL-BR002 Funnel unit for ST series Road Brake lever (M7 thread bleed port) - TL-BR003 Funnel unit for BL series MTB brake lever (M5 thread bleed port) - TL-BR001 Syringe unit - 4-pcs set of Bleed Blocks (Piston spacer) Features: - New oil spill guard lid with an integrated oil stopper holder - Improved syringe unit design now using a stronger threaded tube joint and revised locking clip - Bleeding instructions available for download under 'Documents & Links' below
Shimano TL-BR002 Funnel and Stopper for ST Type Brakes
$26.99
Shimano Genuine disc brake bleed Funnel unit for ST type Road brake lever (M7 thread bleed port) Features: - Oil spill guard lid with an integrated oil stopper holder - Funnel base - Bleeding instructions available for download under 'Documents & Links' below
Shimano TL-BR003 Funnel and Stopper for BL Type Brakes
$26.99
Shimano Genuine disc brake bleed Funnel unit for BL type MTB brake lever (M5 thread bleed port) Features: - Oil spill guard lid with an integrated oil stopper holder - Funnel base - Bleeding instructions available for download under 'Documents & Links' below
Shimano TL-FC16 Hollowtech II Crank Arm Preload Adjustment Tool
$5.99
To adjust preload on Hollowtech II cranksets
SRAM Bleeding Edge Tool For Guide And Level Brakes
$35.00
SRAM Bleeding Edge Tool. - Use with Avid or SRAM Pro Bleed Kit
SRAM Disc Brake Bleed Kit with Hydraulic Fluid
$115.00
SRAM's Disc Brake Bleed Kit has everything you need to ensure your brakes are dialed. The kit is compatible with SRAM X0, XX, Guide, and HydroR brakes. It is not compatible with RockShox' fork bleed kit. Includes the following: • 2 syringes/fittings • bleed blocks • Torx tool • Crow's foot • Bleeding Edge Fitting • DOT 5.1 hydraulic fluid
SRAM Pro Bleed Kit
$146.00
- Improved sealing and durability - New rotating metal hose fittings - High-volume hose with clamp - Longer lasting - Must-have for all mechanics - DOT 5.1 - NOT compatible with RockShox fork bleed kit
SRAM Rear Derailleur B-Gap Tool
$9.00
The new B-gap adjustment tool is simple and easy to use, allowing for a quick set up experience. Small enough to be able to pack in your ride bag or stash in your toolbox for repeated use, it is also industrially recyclable if you find you no longer have use for it. This is the most precise tool for setting up and adjusting your drivetrain.
SRAM Rise,Rail,Roam-Series Hub Service Tool
$17.00 - $34.99
- For removing/installing cartridge bearings in SRAM X0 hubs and Roam, Rail and Rise wheels
SRAM Standard Bleed Kit
$96.00
Confident braking means you can go faster. Enough said. SRAM's Disc Brake Bleed Kit is compatible with SRAM XO, XX, Guide, and HydroR brakes. It is not compatible with RockShox' fork bleed kit. Includes the following: - 2 syringes/fittings - Bleed blocks - Torx tool - Crow's foot - Bleeding Edge Fitting
RockShox 2010 Ario Rear Shock Service Kit
$37.99
Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.
RockShox 2011 Monarch RT3/RT/R Rear Shock Basic Service Kit
$44.99
Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.
RockShox Air Can Service Kit
$14.00 - $33.00
• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus
RockShox Bleed Kit
$66.00
Periodic hydraulic remote bleeds are necessary to maintain consistent performance. RockShox's Bleed Kit has everything you need to keep your Reverb and X-Loc remotes functioning at their best.
RockShox Bleeding Edge Tool
$30.00
- Required to bleed Reverb 1x remotes - Compatible with Standard RockShox bleed kits - Included with remote upgrade kit and Reverb 1x post - Not compatible with SRAM brakes bleeding edge fitting
Page 1 of 31 Next page