Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessories & Parts

Wahoo ANT+ USB with Extension Cord
$57.99
Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.
Wahoo RPM Cadence Sensor (BT/ANT+)
$59.99
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes
Wahoo RPM Speed Sensor (BT/ANT+)
$59.99
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes
Wahoo RPM Speed/Cadence Sensor Combo Pack (BT/ANT+)
$114.99
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes
Topeak BarXtender
$24.99
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz
Tacx ANT+ Dongle Micro USB
$69.99
With this Tacx wireless ANT+ receiver for Android devices with a micro USB port, you can connect to devices that communicate via ANT+. For example a heart rate meter, speed and cadence sensor, sports watch, GPS device or bike computer. This enables you to keep track of your performance continually. It also allows you to link an ANT+ trainer to the Tacx Cycling app (tablet) or Tacx Training app (smartphone), or connect an older model Tacx trainer which only has ANT+ to your telephone, so you can train with the Tacx Training app and Tacx Cloud. The device you want to connect must have a micro USB port and Android 4.3 or higher. This ANT+ dongle is only compatible with devices that have USB On-The-Go.
Tacx Bracket for Tablets
$159.99
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
Tacx USB ANT+ Antenna
$99.99
Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.
Specialized ANGi Crash Sensor
$65.00
Our patented ANGi sensor calls for help when you can’t. In fact, it’s the first device to protect you before, during, and after a crash. It does this through a pairing with our Specialized Ride App for iOS or Android devices. And if it detects a crash, it commences a countdown that, if you’re ok, you can stop and keep riding. If, however, ANGi determines that you’re in need of help, it’ll send an alert to your selected contacts with your last known GPS coordinates and a message that you’re in need of help. What about if you’re out of service coverage? ANGi has a plan for that. Just set your estimated ride time before you head out when you know that your ride will take you out of range. All you need is an active data signal when you start your session. And if you haven’t completed your ride within that time frame, ANGi will send a notification to your contacts with your last uploaded location. - ANGi is a ride tracker, crash detector, and safety beacon. - Includes a one-year subscription to Specialized Ride Premium app. - Detects and reports potentially dangerous helmet impacts to the Specialized Ride app, which notifies your emergency contacts and sends them your most recent GPS coordinates. - Additional premium features include start ride notifications and ride-time alerts. - Attaches to Specialized ANGi-ready helmets. - Approximate six months' battery life on a 2032 coin cell battery. - Weight: 10 grams w/ battery - Two-year sensor warranty
Sigma Cadence Disc Pedal Magnet
$11.99
The cadence magnet pedal insert is designed for tight installation situations. The principle is simple, yet space-saving: the power magnet attaches to any steel pedal spindle by magnetic force alone. From there, it triggers the cadence transmitter with each crank revolution.
Shimano BT-DN300 Di2 Battery
$244.99
The new DN300 Built-In type battery features the same waterproof design that Di2 users have loved for generations. Now with 3 ports, it delivers stable power to Shimano's 12-speed road derailleurs (and shifters if a fully wired option is selected). - Compatible with thinner next-generation electric wire SD300 and systems after R9250/R8150 series - Li-Ion type - Capacity: 500 mAH |3.7Wh (± 2000km autonomy) - Rated voltage: 7.4V - Charges through RD-R9250 |RD-R8150 rear derailleur using EW-EC300 Di2 Charging Cable (sold separately) - Fixing small parts included - Weight: 52g
Shimano EW-WU111 Di2 Wireless Unit
$134.99
- EW-WU111 D-Fly wireless transmitter - Shifting customization, system diagnosis and firmware updates can now be done through Bluetooth Smart on smart phones and tablets, using the eTube app - Also allows to send shifting and system data to compatible cycle computers via private ANT+ protocol - Requires BT-DN110 internal battery or BM-DN100 external battery mount
SRAM RED eTap Blips
$147.00 - $172.00
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls
SRAM eTAP Battery Charger
$82.00
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap
SRAM eTap Battery
$87.00
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap
Quarq ANT+ USB Stick
$62.99
Pair Quarq's ANT+ USB stick with Qalvin 1.5 for firmware upgrades, diagnostics, and calibration on Windows and Macintosh computers.
Profile Design UCM XL Universal Computer Mount 60mm
$17.99
Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
Lezyne GPS Front Bar Mount
$25.99
The Forward Mount is a hinged handlebar mount featuring a stiff and durable composite matrix construction with secure X-Lock and an integrated rubber shim. With a pressed-in stainless steel nut and 3mm hex stainless steel bolt, this mount's sleek, lightweight design positions the GPS computer in front of the stem for better visibility and improved aerodynamics. The X-Lock is a secure and reliable mounting feature integrated into the Standard GPS Mount and the Forward GPS Mount. It safely locks in the computer for worry-free riding over any type of terrain.
Lezyne Pro Speed Sensor
$54.99
Super-compact and lightweight magnet-less cycling speed sensor. Translucent Composite Matrix construction with LED indicator. Simple installation that mounts to most hubs. High-tech dual Bluetooth system that can simultaneously pair with cycling computers and smart trainers. Features a replaceable CR2032 battery. - Weight: 11g - Dimensions: 37 x 33 x 13mm
K-Edge Garmin Max
$76.99
- CNC Machined Aluminum - Combo Compatible (K13-580 adapter sold separately) - GARMIN approved replaceable computer insert protects computer tabs - Anodized Black with laser etched logos - Payload Capacity: Top 123g / Bottom 242g with combo adapter - Weight- 47g Compatibility: - GARMIN Cycling Computers smaller than EDGE 1000, 1030 style (example EDGE 820) - Combo compatible (GoPro-style light/camera interface) K13-580-BLK adapter sold separately
K-Edge Garmin Max XL
$76.99
- CNC Machined Aluminum - Combo Compatible (K13-580 adapter sold separately) - GARMIN approved replaceable computer insert protects computer tabs - Anodized Black with laser etched logos - Payload Capacity: Top 123g / Bottom 242g with combo adapter - Weight- 50g Compatibility: - All Garmin Cycling Computers - Combo (GoPro-style light/camera interface) adapter compatible (K13-580-BLK sold separately)
K-Edge Garmin XL Mount
$74.99 - $84.99
The Garmin XL Computer mount is K-Edge's next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer, specifically designed to accommodate the EDGE 1000, 810 and 800, also compatible with the smaller Edge models like 520, 510, 500, in addition to the Forerunner and Touring models. Their advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that K-Edge's replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. K-Edge provides free replacement inserts, as needed. Attributes (specs): - CNC Machined 6061 T6 Aluminum - Compatibility – 31.8mm and 35mm diameter handlebars - New clamp design is hinged for ease of installation - Supported Computers – Garmin Edge 1000, 810, 800. Also compatible with new Garmin Edge 520, Edge 20 and Edge 25 models, in addition to Forerunner and Touring models. - Combo Compatible – Add the Action Camera Adapter or the complete Combo Mount for the added benefit of using both a computer and GoPro style interface action camera or
K-Edge Wahoo ELEMNT Gravity Cap
$42.99
The K-EDGE Gravity Cap is a great computer mount option for those riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek computer mount. The Gravity Cap replaces your existing top cap and is ideal for Downhill, Enduro, Gravel, Touring, etc. - CNC Machined 6061-T6 Aluminum - Injection Molded Copolymer Interface - Compatibility: Wahoo ELEMNT - Lifetime Warranty - Weight: 18g - Anodized Colors: Black
K-Edge Wahoo Max XL
$76.99
- CNC Machined Aluminum - Combo Compatible (580 Add-On sold separately) - WAHOO approved replaceable computer insert protects computer tabs - Anodized Black with laser etched logos - Payload Capacity: Top - 123g / Bottom 242g with combo adapter - Weight: 50g - Mount Type: Clamp 31.8mm - Mount Weight: 53g Compatibly: - All Wahoo Cycling Computers- ROAM, BOLT, ELEMNT, MINI - Combo compatible (GoPro-style light/camera interface), K13-580-BLK adapter sold separately
K-Edge Wahoo Roam Aero
$109.99
- Compatible with Wahoo Roam computer - CNC machined aluminum - Includes lockable set screw, replaceable insert - Aerodynamic fit - 31.8mm clamp - Mount Weight: 48g
K-Edge Wahoo Sport Mount
$44.99
K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Wahoo Bolt - Fits Handlebars: 31.8MM - NOT GoPro Interface Compatible - Anodized Color: Black Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.
Hammerhead Karoo 2 Mounting System
$39.99
The all-new Hammerhead Karoo 2 Mounting System from the ground up to be stronger, lighter, and lower-profile, making it the best mounting solution available.
Hammerhead Karoo 2 Quarter-Turn Mounting adapter
$14.99
This adapter allows you to attach Karoo 2 to a standard quarter-turn mount if you have aero handlebars or other non-compatible bar types
Giant RideSense ANT+/BLE Sensor
$74.99
Take your riding to the next level with the addition of speed and cadence. Features - Sensor magnet kit for RideSense speed and cadence sensors Kit includes: - RideSense speed magnet - RideSense cadence magnet
Giant Ridecontrol Ergo
$109.99
With full system integration, the RideControl series makes sure you have exactly everything you need at your fingertips. - Cleanly integrated buttons for display-free handlebar controls. - Integrated battery and support mode indicator functions. - Walk Assist mode button for tackling steep hills. - Compatible with ANT+ and RideDash series displays. - Waterproof rating: IP67. - RideControl App compatible.
Page 1 of 7 Next page