Cranksets

- Lower slider replacement parts for E-13 chainguides

- Adapts ISCG mount chainguide arms to fit flange or lockring style bottom brackets

Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with SRAM/TruVativ cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: TruVativ GXP - BB/Frame Interface: PF30

Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.

Wheels Manufacturing BBRIGHT BB30A and PF30A Adaptor for 24mm Spindle Cranks adapts 24mm spindle cranks (Shimano, FSA, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Also adapts Cannondale BB30a and PF30a frames to 24mm spindle cranks (Shimano, FSA, etc.). - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 48g/pr

Wheels Manufacturing 2.5mm Black Aluminum Bottom Bracket Spacers are for adjusting chainline or bearing play in English (BSA) or Italian threaded bottom brackets.

Wheels Manufacturing Wave Washers help eliminate side play in cranks or pre-loaded angular contact bearings. Please refer to your crankset manufacturer's installation instructions for proper placement. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Uncompressed Thickness: 2.1mm - Compressed Thickness: 0.5mm - Spring Steel - 10 per bag

The Wheels Manufacturing PressFit 30 Bottom Bracket Adaptor for Shimano Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter

This Wheels Manufacturing Spacer kit for PF30 Outboard bottom brackets includes 42mm ID spacers that fit between the PF30-OUT cup and the frame's bottom bracket shell. Use spacers for adjusting chainline. - 42mm ID - Black anodized aluminum Includes - (1) x 2.5mm - (2) x 1.0mm

The Descendant 7K crankset delivers consistent performance every ride. Featuring SRAM's X-SYNC2 tooth profile chainring, the Descendant crankset is engineered for complete chain control. Each tooth's thickness is precisely toleranced and controlled to work seamlessly with SRAM chain's inner and outer links. SRAM DUB technology features a better-engineered bottom bracket and a new spindle design. Together, these allow for a more uniform approach to bottom bracket fitment, better sealing against contamination and forward and backward compatibility. Now everyone can benefit from a new measure of durability. - The Descendant 7K crankset is compatible with the SRAM Eagle drivetrain system - Featuring SRAM’s X-SYNC2 tooth profile - Optimized 7000 series forged aluminum arms - SRAM DUB technology features a uniform approach to bottom bracket fitment, better sealing against contamination and is forward and backward compatible - Direct Mount ring - ISO 4210 compliant - 12-Speed, 56.5mm chainline - DUB bottom bracket sold separately

The svelte strength of carbon fiber with the swagger of heavy metal. The Descendant Carbon DUB crankset uses a proprietary TruVativ carbon construction process, delivering a crankset light enough for XC, yet durable enough for Enduro. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Carbon construction for lightweight durability - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fully compatible with any 1x drivetrain - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 135/142 MTB Hubs

Born From The Mountain Whether your target is high speed or big air, an unwavering focus on dependability and style can never be overlooked. Blending the experience of countless DH podiums, big mountain competitions, and film sessions, the new Descendant DH crank brings clock-beating weight savings to freeride burliness—at a price that will leave money for the next adventure. Meet your gravity goals—Descendant. Features - Lightweight DH crankset - New graphics - World Cup proven design - Fully compatible with any 1x drivetrain - X-SYNC chainring Specifications: - Speeds: 10/11 - BB Compatibility: DUB BSA MTB83, DUB PF MTB104.5/107 - Chainring Size: 34 - Crank Arm Length: 165mm, 170mm - Chainline: 56.5mm - BB Spindle Interface: DUB - Chainring Material: Aluminum - Guard: No Guard - Bolt Circle Diameter (BCD): Direct Mount (DM) - Crank Arm Material: Aluminum

TruVativ Crank Arm Fixing Bolts - Monocoque carbon crankset with hollow-arm design - FSA Mega Tooth chainring design greatly improves chain retention - FSA BB392 compatibility allows use in nearly any frame - Bottom bracket not included

The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Shimano Ultegra R8000 crank arm and is compatible with all Shimano Hollowtech II road drivetrains. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5% accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 - Sizing Options: - Lengths: 165mm, 170mm, 172.5mm, 175mm Includes: - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

Whether you're looking to take your training to the next level or you simply want a better way to measure energy expenditure, a power meter is your best bet. And the Power Cranks Ultegra Upgrade Kit are no exception. With our lightweight power sensors on a Shimano Ultegra crankarm, it's the perfect way to enter the power meter game. The development of Power Cranks began with our Human Performance Team looking at riders in realistic scenarios on the bike. Historically, power meters have been validated by two different methods—one is by measuring the produced torque by applying a static, linear load to a crankarm or chainring, while the second uses a power generating motor to pedal the bike. Well, cycling is neither static nor linear, and humans apply power much differently than a machine. So, we found that neither of these methods answers the 'real-world' accuracy question. To get the best test for accuracy, in all types of riding scenarios, we built our own cycling treadmill, the WinMill, to measure power output to a known truth. This new benchmark lets us evaluate accuracy under all riding conditions—seated versus standing, various power and cadence levels, different weights, and a myriad of gear. This data acquisition process is our gold-standard for testing power meters, and through our testing and external validation from the Locomotion Lab in Boulder, Colorado, Power Cranks have been proven to have the highest accuracy in real-world scenarios (+/- 1.5%). The Power Cranks are also easy to live with, with class-leading temperature compensation firmware and waterproof enclosures. Calibration is only required during seasonal-type fluctuations in temperature, and the included wrench makes battery swaps a breeze. - +/- 1.5% real-world accuracy tested on the WinMill and validated by the Locomotion Lab in Boulder, CO. - Works with ANT+ and Bluetooth® devices. - Easy set-up and diagnostics with the Specialized Power app. (iOS and Android versions available). - Shimano 8000 generation Ultegra left-side power measurement. - Right crankarm and spider NOT included. - Available in 170-175mm crankarm lengths.

This 2-piece crankset with chain guard is perfect for city and commuter bikes. - Chainring: 45T, 42T, 39T - Single or double chainguard integrated design - Chain compatibility: Super Narrow HG for 9-speed, HG 8-speed (1/2 inch x 3/32 inch)

Shimano Altus M311 cranksets provide durability and reliable shifting for triple chainring drivetrains. - Hyperdrive SG-X chainrings - 7/8-speed compatible - Spindle interface type: Square Taper JIS

Shimano Acera FC-M361 cranksets feature sturdy construction, reliable shifting, and replaceable chainrings. - Spindle Interface type: Square Taper JIS

The Shimano FC-M371 crankset for square bottom brackets features a rigid 2-piece construction and Hyperdrive SG-X chainrings. - Chain guard included - 9-speed

Claris R2000 series cranks are clean and stylish; an ideal option for long touring, town cruising, and daily commuting. - Hyperglide technology ensures smooth and reliable shifting - 4-gear arm crank design - Includes crank arm fixing bolt - 150mm Q-factor

Shimano's Deore Crankset features efficiency and fast shifting to let you make the most out of the trails. Its smooth shifting rhythm maintains speed and acceleration over challenging terrain and provides optimized gear combinations and ratios for trail riding. Features: - HOLLOWTECH II Crankset (3x10-speed) - Efficient power transfer - HOLLOWTECH II crank arm with 4-arm construction - Composite chainring - Close step tooth profile for smooth shifting - Bottom Bracket compatibility: SM-BB52/BB-MT500-PA - Chain Line: 50

Shimano XT Left Crank Arm - Spindle Interface Type: Hollowtech II

Shimano's Dura-Ace 11-Speed Hollowtech II Crankset has set the benchmark in strength-to-weight ratios, which is why it's proven itself at the highest echelon of competition. Made of cold-forged and CNC-machined aluminum, it has hollow crankarms and a hollow large chainring. Both chainrings also feature teeth perfectly designed to assist up- and down-shifts. Perhaps most unique is the 4-arm design that maximizes strength and rigidity where your pedal stroke is strongest. The result is legendary stiffness for awesome power transfer and precision shifting you'll love.

Shimano's new FC-RX810-2 crank balances weight and efficiency for mixed-terrain riding. Gearing options cater for the specific demands of gravel riding and to maintain tighter gear steps for maintaining pedaling rhythm. The 2x11-speed crank is available in a 48-31T, 40T, and 42T chainring combination and 170, 172.5, and 175mm crank arm lengths. - Gravel gear ratios preserve riding rhythm over rough surfaces with wider tires - Optimum gearing for mixed terrains and riding styles - Wide-range double - Gear combinations: 48-31T, 40T, 42T

The RS510 crankset features a 4-arm design that's light and stiff, providing high performance on a low budget. - For 11-speed drivetrains - Compatible with frames of O.L.D. 135 mm and 410 mm chainstay length - Affordable and high-end style crankset

- Replacement left-side crank arm for Shimano STEPS CITY E6000

Big air, pure speed and total concentration: the DH world in a nutshell. It's a world where line choices are made in the blink of an eye, absolute faith in your gear is a must, and Shimano's Saint Crankset is ready to answer the call every time. Ultra-wide bottom bracket bearing spacing and hollow-forged crank arms are used for maximum rigidity and strength under demanding conditions, and a steel pedal insert adds even more burl. A single chainring keeps things simple and durable up front so you can focus on the ride, and not a dropped chain. See you at the bottom.

- Series: SORA - Crank Construction: 2-piece crank construction - Bottom Bracket: BB-RS500, BB-RS500-PB - Chain Line: 43.5 - 9-speed - Four-arm BCD

Shimano's Tiagra Front Chainwheel is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Series: Tiagra 4700 - Crank Construction: 2-piece crank construction - Cassette Compatibility: 10-speed - Chain Compatibility: Series color - Bottom Bracket: BB-RS500 / BB-RS500-PB

The Tourney TY501 crankset provides crisp, reliable shifting for your triple chainring drivetrain. - Precision indexed shifting - 8/7/6-speed compatible - 3 crank length specification available - Precise chain line control - Light and reliable shifting - Versatile performance - Wide compatibility with multiple components - Quick and precise assembly