Forks & Suspension

Replacement Fox IGUS eyelet bushings for one eyelet. Measures .598OD,.501ID,

Crush washer (sold individually) Manufacturer Part Number: 241-01-002-C

The Fox 34/36/40 Crush Washer seals the fork lowers and prevents oil from seeping out while simultaneously keeping dirt out. It’s designed to fit Fox 34/36/40 mm stanchion forks and sits on the damper side shaft which extends out from the bottom of the forks. SPECS Compatible with the damper side of 34/36/40 mm fox forks Made from Nylon 13mm x 15mm (inner x outer) diameter Fox part # 241-01-011

These are shock bearings for Fox suspension. Specifications: Inside Diameter: 0.5" Length: 0.5" Shaft: 0.498"

We all lose those little parts now and then. Replacement alloy Valve cap from Fox for all rear shocks.

Changing the volume spacers in your fork is an easy internal adjustment that allows you to change the amount of mid-stroke and bottom out resistance. With this you can dial in your Fox Float fork's air volume to suit your riding style.

We all lose those little parts now and then, protect the air spring and make your bike look new Replacement alloy Valve cap from Fox for Fox Float 32 and Fox Float 34 forks.

Fox Suspension Fluid is 5wt, 10wt, 20wt and fully synthetic. Green: Used as a bath oil in all Fox Shox forks. It is also the damper oil you will need for all open bath cartridges. Red: Used solely in the older sealed cartridge forks. Gold: Is intended for 'Fit Damper' forks. 5wt Teflon Infused: Grip and Grip2 Damper-Side Bath. Fox Oil Type and Volume Chart https://www.ridefox.com/fox17/help.php?m=bike&id=1106

Light Cable guide for Fox forks.

Air volume spacers are a fast and easy way of tuning your suspension. Changing the quantity of Air Volume Spacers changes the air spring curves to be more(adding spacers) or less(removing spacers) progressive through the mid-stroke and bottom-out resistance If your sag is set properly on your bike but you're either using too much travel volume spacers are a great way to customize the performance of your bike.

FOX is now offering decal kits in 11 custom colorways. Kits include fork and shock decals to fit almost every FOX fork and shock model. Specific decals for 32, 34, 36, 38 and 40 forks as well as DPS, FLOAT X, FLOAT X2, DHX and DHX2 shocks. One decal kit can cover more than one fork and shock combo. Images to be added later

If you want the best, go straight to the source. These are Fox's new Low Friction seal kits — the same seals used on their premium line of "Factory Series" forks. Great hop-up for your older Fox fork, essential for your newer Fox Fork Inspect and clean and/or change every 125 hours of riding use or anually for maximum performance and fork longevity. Select the kit that matches the stanchion tube size of your Fox fork Note* - Seals do not work on older forks with "flanged" style lowers and a seal driver tool is necessary for proper installation.

Air volume spacers are a fast and easy way of tuning your suspension. Changing the quantity of Air Volume Spacers changes the air spring curves to be more(adding spacers) or less(removing spacers) progressive through the mid-stroke and bottom-out resistance If your sag is set properly on your bike but you're either using too much travel, or you would like a bit more support through your mid-stroke, volume spacers are a great way to customize the performance of your bike. Kit includes 5 spacers each a different volume, so you can dial in the progression. For 1/2" Shaft models only, Not compatible with other models of Shock. Please confirm your Shock Model and Compatibility with Fox Racing suspension. WILL NOT FIT 2021 and Newer FLOAT X Shocks

For 2013 or newer Float Shocks, 9mm Shaft Air volume spacers are a fast and easy way of tuning your suspension. Changing the quantity of Air Volume Spacers changes the air spring curves to be more(adding spacers) or less(removing spacers) progressive through the mid-stroke and bottom-out resistance If your sag is set properly on your bike but you're either using too much travel, or you would like a bit more support through your mid-stroke, volume spacers are a great way to customize the performance of your bike. Kit includes 5 spacers each a different volume, so you can dial in the progression.

Fox Fork Mud Guard for 2021+ Single Crown Fox Forks Protect your bike and your face with Fox's new integrated fender. Compatible with 2021+ Fox 36 and 38 forks. Includes all installation hardware.

FOX 34 Float NA2 Rebuild kit

FOX 34 Float NA2 Rebuild kit

Freshen up your Fox shock. It is a fairly simple service that can greatly improve the performance of an old Fox shock and bring it back to life. This kit includes everything you will need for the service. Fox Float rebuild kit for all Fox Float shocks from 2000 until current model shocks. Includes 2 quad rings Includes 2 O-rings Includes dust wiper Includes travel indicator O-ring Includes 4 back up rings

Volume Spacer tuning kits for FOX rear suspension service and repair. for 2022+ model year

If you want the best, go straight to the source. These are Fox's new Low Friction seal kits — the same seals used on their premium line of "Factory Series" forks. Great hop-up for your older Fox fork, essential for your newer Fox Fork Inspect and clean and/or change every 125 hours of riding use or anually for maximum performance and fork longevity. Select the kit that matches the stanchion tube size of your Fox fork Note* - Seals do not work on older forks with "flanged" style lowers and a seal driver tool is necessary for proper installation.

Fox Fork Mud Guard for 2021+ Single Crown Fox Forks Protect your bike and your face with Fox's newest full-sized integrated fender. This optional add-on XL Fork Mud Guard keeps the spray out of your face and adds even more protection for your fork’s stanchions and seals. Designed specifically for 2021 and newer FOX 36 and 38 fork models, and built to give you 85% more coverage than the small, this guard mounts directly onto the fork thanks to a proprietary 4-point direct mount system. Compatible with 2021+ Fox 36 and 38 forks. Includes all installation hardware.

If you want the best, go straight to the source. These are Fox's new Low Friction seal kits — the same seals used on their premium line of "Factory Series" forks. Great hop-up for your older Fox fork, essential for your newer Fox Fork Inspect and clean and/or change every 125 hours of riding use or anually for maximum performance and fork longevity. Select the kit that matches the stanchion tube size of your Fox fork Note* - Seals do not work on older forks with "flanged" style lowers and a seal driver tool is necessary for proper installation.

All standard steel springs are black and are marked with their spring rate in lbs/in (in 50 lb increments) and the total travel of the spring itself. Standard black springs should only be paired with shocks having less travel than the travel marked on the spring itself. Compatible with both Fox and Marzocchi rear shocks The 35 mm/1.385" Internal diameter also fits DVO, MRP and X-Fusion shocks

If you want the best, go straight to the source. These are Fox's new Low Friction seal kits — the same seals used on their premium line of "Factory Series" forks. Great hop-up for your older Fox fork, essential for your newer Fox Fork Inspect and clean and/or change every 125 hours of riding use or anually for maximum performance and fork longevity. Select the kit that matches the stanchion tube size of your Fox fork Note* - Seals do not work on older forks with "flanged" style lowers and a seal driver tool is necessary for proper installation.

Seals and parts for a 2022 Fox Float X air sleeve service. This kit is meant to service your rear shock's air can, not to do a full damper rebuild.

If you want the best, go straight to the source. These are Fox's new Low Friction seal kits — the same seals used on their premium line of "Factory Series" forks. Great hop-up for your older Fox fork, essential for your newer Fox Fork Inspect and clean and/or change every 125 hours of riding use or anually for maximum performance and fork longevity. Select the kit that matches the stanchion tube size of your Fox fork Note* - Seals do not work on older forks with "flanged" style lowers and a seal driver tool is necessary for proper installation.

If you want the best, go straight to the source. These are Fox's new Low Friction seal kits — the same seals used on their premium line of "Factory Series" forks. Great hop-up for your older Fox fork, essential for your newer Fox Fork Inspect and clean and/or change every 125 hours of riding use or anually for maximum performance and fork longevity. Select the kit that matches the stanchion tube size of your Fox fork Note* - Seals do not work on older forks with "flanged" style lowers and a seal driver tool is necessary for proper installation.

Replacement Air shaft Assembly for Changing the Travel within your fork This Assembly is for 2018 Fox 32 in Factory, Performance - Elite For Non Stepcast Forks 26inch and 27.5

Replacement Air shaft Assembly for Changing the Travel within your fork This Assembly is for 2019 to 2021 Fox 34 Non-Stepcast forks in Factory, Performance - Elite

Replacement Air shaft Assembly for Changing the Travel wtihin your fork This Assembly is for 2019 Fox 36 in Factory, Performance - Elite