Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Accessories & Parts

$84.99
Make pit stops on your bike excursion without worry of losing your rides. This security cable keeps your bikes and mast-style hitch mount locked to your vehicle. Cable stows in arm of rack when not in use. Compatible with the DoubleDown and BigHorn.
- Lock your bikes and your hitch-mount bike rack to your vehicle
- Compatible with the Yakima DoubleDown and BigHorn
- Integrated cable lock secures outside bike to the mount
- Cable stows in the arm of the rack when not in use
- HitchLock secures the rack to your vehicle
- Includes 2 SKS Lock Cores so your HitchLock and locking cable will use the same key
Product Specs:
- Weight: 0.50 lbs.
- Dimensions: L 7.00 in x W 4.00 in x H 2.00 in
- Limited Lifetime Warranty

$28.99
- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks.
- Includes two straps
- Weight: 0.44 lbs.
- Dimensions: L 15.50 in x W 1.00 in x H 18 in

$91.99
Use these clamps to attach the LockNLoad platform to an existing Yakima roof rack, factory rack, or other aftermarket roof-rack system. One pair of clamps is required for each crossbar. Check your vehicle fit to verify requirements.
Product Details:
- Sold as a set of 2 clamps, with included hardware to attach to a single crossbar.
- The LockNLoad platform requires 2 or 3 sets of Crossbar Clamps (check your vehicle's and platform's fit requirements for the number of crossbar clamps needed).
- Welded steel construction for strength.
- Rubber pads protect crossbar finish.
- Compatible with all Yakima crossbars, along with many other aftermarket crossbars, factory crossbars, and 2" round or square tubing.
- Each set of crossbar clamps adds 110 lbs. of weight capacity, up to 330 lbs., when used with 3 sets of crossbar clamps. Never exceed the Yakima- or manufacturer-specified weight limit for your vehicle.
Product Specs:
- Weight: 1.86 lbs
- Dimensions: L 2.75in x W 1.80in x H 1.00in
- Some assembly required, 15 minute install

$169.99
Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight.
- Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails
- Range of shapes lets you find the precise, secure fit specific to your vehicle
- Unique inner and outer clip design delivers exceptional hold
- Powder-coated stainless steel provides maximum strength and durability
- Sold in sets of four – just one kit sets up your system

$327.99
Take sleek to a new level – the ingenious RidgeLine Towers integrate with flush-mount factory side rails so you can build a real rack that carries more. Strong and versatile, they attach easily and have a sleek design that aligns with your vehicle’s aerodynamic attitude.
- Attaches a base rack system to vehicles with flush-mount factory side rails. RidgeClips and crossbars required for a complete system.
- Both are sold separately. Use Fit My Vehicle to find the clips and crossbars.
- Advanced design is strong and quiet and aligns with aerodynamic vehicle aesthetics
- Works with JetStream, CoreBar and RoundBar crossbars
- Unique clip design adapts to your rails for a secure, accurate fit
- BarBed has 12° of pitch adjustment to optimize tower position and level bars
- Super-simple installation – tool included
- Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating
- Easily locks to you vehicle with our SKS system (sold separately)
- RoundBar SL Adapter required to use Yakima's classic RoundBar with
- StreamLine System Towers (sold separately)
- Streamline crossbars are compatible with any StreamLine Tower StreamLine Tower TECHNICAL SPECS
- Weight: 1.25 lbs
- Dimensions: L 5.00” x W 5.25” x H 3.50”

$99.99
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way.
- Fits all lockable accessories
- Includes 4 SKS Cores and matching keys
- 2 keys included plus a control key

$13.99
SuperCush Zip Strips for RidgeBack, SwingDaddy, FullTilt, LongHaul, RoadTrip, SpareRide, and FullSwing model bike racks (2016-2019). Includes two Zip Strips.

$39.95
The Thule Xadapt 8 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.

$124.95
The Artificial Rain Gutters from Thule let you attach any of their classic cargo racks (sold separately) to vehicles that lack integrated rain gutters. These are most commonly installed on camper tops, pickup truck caps, and Jeep Wrangler tops. This set includes four Artificial Rain Gutters and rubber gaskets to protect your car's finish.

$119.95
This 53" long ramp, for use with Thule EasyFold XT, makes it easier to load and unload bikes, especially for taller SUV's and vans.
Features
- Quickly load and unload bikes from taller vehicles by adding this longer ramp (53") to the Thule EasyFold XT
- Easily attach the ramp to the Thule EasyFold XT wheel tray using the tongue and groove connection

$89.95
Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely.

$199.95
You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

$39.95
Thule's No-Sway Cages stabilize and prevent bike-to-bike contact on your hitch-mounted rack. They're only compatible with Thule's T3 cradles. You get 2 per pack (enough for 2 bikes).

$89.95
Install or replace all lock cylinders on your Thule products and use the same key for all.
- Replace the locks in your Thule product in a few easy steps
- Including grip-friendly Thule Comfort key
- Set of 4 locks, all using the same key

$94.95
Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.

$67.99
Secure peace of mind and your trunk rack to vehicle with our Trunk Rack Lock.
- Secure bike rack to vehicle to deter theft.
- Cables secured within closed trunk.
- Includes 8 ft. cable.
- Includes 2 keys.
$44.99
This bracket is offered as an add-on to rack owners who have DH bikes with dual crown forks.
This replacement bracket is required if you will be transporting DH bikes with dual crown forks on your Mammoth Mounts rack. The bracket replaces one of the existing standard brackets. The bracket is wider to accommodate the width of dual crown forks such as a FOX 40, RockShox BoXXer, MRP Bartlett or others. We cannot guarantee that bikes without dual crown forks will work in this bracket. It is recommended for use only with dual crown forks.

$39.99
Kuat's lock comes with a burlap bag, dust cap, two keys, and a Küat keychain bottle opener. 3/8" pin is for their 1.25" racks and the 1/2" pin is for their 2" racks.

$119.00
RackDock from Kuat. A sophisticated solution for storing your hitch rack. Easy wall installation and the ability to hold up to 100lbs keeps your hitch rack secure and out of the way in the garage, preventing damage to the rack, cars, and of course—bikes.
- Supports up to a 4-bike rack (100 lb max)
- All hardware included
- 2" hitch and 1.25" hitch adaptor included
- Magnetic faceplate

$99.99
Yakima's 1A HighRise Spacers convert their standard 1A RainGutter Towers (sold separately) into HighRise towers for more clearance. They give a rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks).

$69.99
Coupler for 2" balls for RACKandROLL trailer.
Product Specs:
- Weight: 4.12 lbs.
- Dimensions: L 11.00 in x W 3.90 in x H 5.00 in
- Limited One Year Warranty

$19.99
End caps for 86" Cross Bars. Includes four end caps
Please note these end caps are specific to the 86" cross bar.

$74.99
Yakima's 9-foot SKS Cable provides a visible theft deterrent for bikes and gear. It locks your load to the crossbar so you can park and leave your vehicle without worrying about your bikes.

$38.99
Make just about any accessory lockable with an SKS accessory housing. Use with bike, boat or BasketCase accessories that don't accept SKS lock cores. SKS lock cores sold separately.
- Lock rack accessories to your vehicle's crossbar
- Use with bike, boat, and BasketCase accessories
- SKS Lock Cores sold separately
Product Specs:
- Weight: 0.20 lbs.
- Dimensions: L 4.00 in x W 3.25 in x H 1.00 in
- Limited Lifetime Warranty

$64.99
Go sleek with this low-profile t-slot awning bracket and mount up your awning with more options. This hardware kit replaces the standard mounting hardware of your awning and gives you multiple height settings to help you dial in your preferred look, including a rear deploy option.
Product Details
- ?Configurable in multiple height settings to allow a custom position on your vehicle.
- T-slot design for easy attachment to Yakima HD Bar, JetStream, LockNLoad Platform and other standard t-slot crossbars
- Rear deploy compatible with SlimShady 4.5 on a LockNLoad platform or HD Bar
- Heavy-duty steel construction with durable, powder-coated finish
- Compatible with all Yakima SlimShady awnings
Product Specs
- Weight: 3.78 lbs.
- Dimensions: L 5.75 in x W 3.25 in x H 4.65 in

$589.99
Hitch rack swing adapter.
Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido.
Product Details:
- Hitch extension converts most 2" hitch products to a swing-away rack
- Provides easy tailgate access - even with a rack fully loaded with bikes
- Easily swings open 90 degrees and locks in place with the simple to use release lever
- Safety latch secures the rack closed while you're on the road
- Secures to any 2" hitch receiver using a threaded pin
- Included SKS (Same Key System) lock keeps the rack secure
- 250 lb maximum load capacity (rack plus gear)
Product Specs:
- Weight: 35.46 lbs
- Dimensions: L 20.00" x W 30.00" x H 8.00"
Installation Details:
- Some Assembly Required
- 10 Minute Install
- 2" Hitch Receiver Required
Compatible with the following:
- Dr.Tray- 2" only (without the EZ+1 attached)
- SingleSpeed
- HangOver 4 - 4 Bike only
- TwoTimer
- HoldUp EVO
- HoldUp EVO +2
- HoldUp
- HoldUp +2
- FourTimer
- LongHaul (Vans and Passenger Vehicles Only)
- RoadTrip (Vans and Passenger Vehicles Only)
Page 1 of 6
Next page