Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Hubs | Rims | Spokes

Zipp Sapim CX-Ray Straight Pull Spokes and Nipples
$14.69 - $24.99
- Replacement straight pull spokes for Zipp 88 (Front) and 188 (Rear) Hubs
Velocity Major Tom 700c Tubular Rim
$143.50
- Blending the A23 clincher and Escape tubular rims, the 23mm wide Major Tom provides improved traction for unparalleled ground control - Seam relief channel that allows for consistent and reliable tubular tire installation - Hollow core aluminum with machined sidewalls for precise braking and handling
Stan's No Tubes 3.30/3.30Ti Shimano/SRAM Steel Freehub Body (9/10-speed)
$149.99
Replacement Shimano/SRAM steel freehub body for Stan's NoTubes 3.30 disc or HD disc rear hubs.
Spank Flare 24 OC Vibrocore 650B/27.5-inch Rim
$199.99
The SPANK Flare 24 OC Vibrocore Rim is a disc-specific, tubeless-ready clincher rim optimized for Gravel, Adventure, and MTB Cross Country use. The Vibrocore inner well reduces the transmission of harmful vibration frequencies enhancing comfort on those long days on the bike. The OC edition of the SPANK Flare 24 features an asymmetric profile to improve spoke tension balance between drive and non-drive side spokes. - Disc-specific, tubeless-ready clincher rim, with Vibrocore, optimized for Gravel, Adventure, and MTB Cross Country use - Vibrocore inner well reduces the transmission of harmful vibration frequencies, improving rider comfort and increasing the fatigue life of the rim - Low-profile 16.5mm depth and wide 27.5mm outer width enhance Radial Compliance, improving traction while reducing negative feedback to the rider - Asymmetric, 24mm inner width profile improves spoke tension balance between drive-side and non-drive-side spokes and optimizes gravel/XC tire spread - Bead Nip tubeless bead seats provide reliable tubeless performance even at low pressures
Spank HEX J-TYPE F15/20 Front Hub
$137.99
- Weight optimized, gravity inspired front hub - 32mm-diameter oversized bearings allow adaptability up to 20mm thru axles - Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes - Compatible with 32 HEX front hub adapters only - Advanced seal system improves prevention of bearing contamination
Spank HEX J-Type R148 Rear Hub
$274.99
- SPANK's HEX DRIVE 102T technology delivers 3.5° engagement, for almost instant pickup - 6 independent pawls with 3 steps per pawl, work in unison, meaning 18 engagement points per click - Bite-Block Alloy HG and XD Freehub bodies resist damage from cassettes without the weight penalty of steel - Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes - Advanced seal system improves prevention of bearing/drive system contamination
Spank Oozy Trail 395+ Rim
$129.99 - $144.99
- An ultra-wide, high performance alloy rim, weight optimized for Enduro, Trail and All Mountain use - Tubeless ready with anti-burp rim hooks to prevent the loss of pressure and keep tires firmly in place - 32 holes with an inner width of 35mm and outer width of 39.5mm provides ultra-wide support for Plus-Size and high volume tires - The corrugated rim center, a brand acclaimed technology, adds exceptional strength, making it more rigid and allowing the rim to be wider without adding material - Shotpeen finish to increase fatigue life and make it more durable - MGR Dynamal Alloy
Shimano 105 HB-R7000 Rim Brake Front Hub
$47.99 - $48.99
Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling. - Internal O-rings and grease sleeve - High quality, sealed Cup & Cone Bearing - High durability and smooth rolling for sustained performance
Shimano Deore 6-Bolt Disc Brake Front Hub
$42.99
The Shimano HB-M525A hub is ideal for use with 6-bolt disc brake rotors and quick release dropouts. - Double contact sealing - Super polished bearing races for low friction rolling - 6-bolt ISO disc mounting surface
Shimano Deore XT M8100 Front Hub
$74.99 - $76.99
With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-less 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance
Shimano SLX M7100 Front Hub
$64.99 - $66.99
With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-free 15mm thru axle system is stiff and lightweight - Simple setup and reliable trail performance
SRAM 900 Front Hub
$131.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Fully convertible with tool-free end caps - 24, 28 or 32 spoke holes
RaceFace ARC 29-inch Carbon Rim
$674.99
Stiffer, stronger, and ready to party, ARC 31 Carbon Rims take notes from Race Face's Next R carbon wheelset; built to handle the most challenging days on the trail. With one of the lightest enduro rims on the market, you can tackle the climbs with speed while you hit the descents with confidence. The ARC 31 has been redesigned to take full advantage of the benefits carbon fiber has to offer, and feature a generous 31mm internal width for modern tire widths with lower pressures. Lace these rims to your favorite hub, and you’ve got a world-class wheelset ready for action.
RaceFace ARC Heavy Duty 29-inch Rim
$139.99
30mm Heavy Duty rim for gravity and e-bike applications. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Tubeless ready, strong tire retention bead
RaceFace ARC Offset 27.5-inch Rim
$134.99 - $139.99
The ARC Offset rims utilize an asymmetrical design to optimize spoke tension balance, wheel durability, and wheel stiffness. Its 6069 Alloy construction provides a superior strength-to-weight ratio, significantly improving toughness. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Strong tire retention bead - Tubeless ready
RaceFace ARC Offset 29-inch Rim
$134.99 - $139.99
The ARC Offset rims utilize an asymmetrical design to optimize spoke tension balance, wheel durability, and wheel stiffness. Its 6069 Alloy construction provides a superior strength-to-weight ratio, significantly improving toughness. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Strong tire retention bead - Tubeless ready
Hope Pro 2 Evo Rear 12x142mm Conversion Kit
$33.99
12x142mm conversion endcaps for Hope Pro 2 Evo rear hubs.
DT Swiss 240 Classic Road Front Hub
$349.99
The number to count on—240 with Ratchet EXP. The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.
DT Swiss EX 511 27.5-inch
$205.99
A 30mm welded Enduro rim developed for the fastest EWS rider. Enduro may be young as a discipline, but at its core is the intrinsic need of riders to ride burlier terrain faster and faster. Something that MTB has been all about since the beginning. The EX 511 rim is the perfect tool for this quest. It comes with all the technology that has delivered many EWS wins and packs it in a 30mm-wide profile, ready to go burlier, faster.
DT Swiss EX 511 29-inch
$205.99
A 30mm welded Enduro rim developed for the fastest EWS rider. Enduro may be young as a discipline, but at its core is the intrinsic need of riders to ride burlier terrain faster and faster. Something that MTB has been all about since the beginning. The EX 511 rim is the perfect tool for this quest. It comes with all the technology that has delivered many EWS wins and packs it in a 30mm-wide profile, ready to go burlier, faster.
DT Swiss Standard Brass Nipples
$0.25 - $0.50
The DT standard brass nipples are perfect for any wheel building project. Available with or withour DT Pro Lock®. DT Pro Lock® nipples have a patented liquid inside the nipple thread, which makes the connection between nipple and spoke extremely durable. Available in many lengths and in silver or black.
DT Swiss XM 481 DB 27.5-inch
$209.99
Strong and lightweight welded AM rim in 30mm inner with modern tires. Riders who like the idea of giving their tires some extra volume and support will find the ideal partner with the XM 481. Its full 30mm of inner width combined with a minimal hook and perfect tubeless compatibility make it ready to tackle all demanding trails, both up and down the mountain.
DT Swiss XM 481 DB 29-inch
$209.99
Strong and lightweight welded AM rim in 30mm inner width for modern tires. Riders who like the idea of giving their tires some extra volume and support will find the ideal partner with the XM 481. Its full 30mm of inner width combined with a minimal hook and perfect tubeless compatibility, make it ready to tackle all demanding trails, both up and down the mountain.
DT Swiss XR 391 DB VI 29-inch
$169.99
Modern welded XC rim, developed with a 25mm inner width. Modern-day XC rim: The right width to run wide tires necessary to be competitive on today's demanding Cross Country courses. The welded construction of the XR 391 and the bead-blasted, anodized finish are on par with your high-end XC ride. The use-specific profile, the custom alloy, and the use of the PHR nipple interface allow you to pair the unpairable: Wide, strong, and light.
Bontrager Rapid Drive 108 Fat Rear Hub
$274.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high quality wheelset. Product details - Bontrager rear hub for use with 197mm dropouts - Rapid Drive 108 hub instantly transfers effort into forward momentum - Flange diameter: 58mm - NDS flange offset: 59.5mm - DS flange offset: 46mm - 32 hole, 6-bolt rotor
Bontrager Rapid Drive Boost Front Hub
$104.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset. Product details - Bontrager front hub for use with 110mm forks - Flange diameter: 58mm - NDS flange offset: 25.5mm - DS flange offset: 37.75mm - 28 hole, 6-bolt rotor
Bontrager Rapid Drive Fat Front Hub
$139.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset. Product details - Bontrager front hub for use with 150mm forks - Flange diameter: 58mm - NDS flange offset: 45mm - DS flange offset: 53.5mm - 32 hole, 6-bolt rotor
Zipp 101 XPLR Front Rim
$1,049.99
Zipp's 101 XPLR is our first purpose-built rim for gravel. Thanks to MOTO Technology, this wheelset arms gravel cyclists with more control and durability over harsh terrain, providing a smooth ride quality that helps reduce fatigue. That means a more comfortable ride. The 101 XPLR -short for explore-is purpose-built for riders searching for adventure beyond the norm. Think of it as a magic carpet ride over primitive roads, especially with large tubeless tires at lower tire pressures. This rim is ideal for gravel racing, adventure, or any long day in the saddle. Based on Zipp's MOTO Technology, the 101 XPRL's single-wall rim construction provides excellent compliance and vibration damping. Less fatigue, allows you to ride longer and faster. Quarq's TireWiz is an add-on option for 101 XPRL to dial in your pressure for an even more compliant ride. - All day comfort and compliant ride - Available in 700c or 650b - 27mm wide internal profile - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Less fatigue, which allows you to ride longer and faster - Frustration-free tire installation - Lifetime Warranty
Zipp 101 XPLR Rear Rim
$1,049.99
Zipp's 101 XPLR is our first purpose-built rim for gravel. Thanks to MOTO Technology, this wheelset arms gravel cyclists with more control and durability over harsh terrain, providing a smooth ride quality that helps reduce fatigue. That means a more comfortable ride. The 101 XPLR -short for explore-is purpose-built for riders searching for adventure beyond the norm. Think of it as a magic carpet ride over primitive roads, especially with large tubeless tires at lower tire pressures. This rim is ideal for gravel racing, adventure, or any long day in the saddle. Based on Zipp's MOTO Technology, the 101 XPRL's single-wall rim construction provides excellent compliance and vibration damping. Less fatigue, allows you to ride longer and faster. Quarq's TireWiz is an add-on option for 101 XPRL to dial in your pressure for an even more compliant ride. - All day comfort and compliant ride - Available in 700c or 650b - 27mm wide internal profile - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Less fatigue, which allows you to ride longer and faster - Frustration-free tire installation - Lifetime Warranty
Zipp 3ZERO MOTO 27.5-inch Tubeless Front Rim
$1,099.99
Zipp's 3ZERO MOTO carbon rims are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension
Page 1 of 5 Next page