Seat Bags

The custom-made Backcountry Dropper Post Adapter allows Backcountry and Innovation Lab Saddle Packs to be used on mountain bike dropper seat posts. The adapter is designed to hold the pack securely, while also limiting travel to avoid damage to either the post or the bag. The saddle bag dropper post adapter comes with a choice of shims for mountain bike dropper posts with 30.9mm, 31.6mm and 34.9mm lower diameters and is easily fitted using a 3mm hex wrench. The broad, flat rear section and ridged strap retainer improve stability over rough terrain and the dropper post saddle bag adapter is compatible with any bag that uses a 25mm seat post strap (or smaller). The Backcountry Dropper Post Adapter is designed to work with mountain bike dropper posts with a 25mm or 26mm upper section diameter. These sizes are typical for posts with a 30.9mm, 31.6mm or 34.9mm lower section diameter. If you have any questions over compatibility, please contact us. Materials Injection moulded glass-reinforced nylon for durability Silicone shim for a secure fit

Designed to store the essentials to repair a mid-ride mechanical, our Expedition Tool Pack is a sleek, ultra-compact pack that’s excellent for short rides and bikepacking adventures. Fitting neatly under the saddle, the tool bag attaches securely to the bike with a Velcro-backed Hypalon strap that’s effective even when exposed to road spray and grit – a weakness of traditional zippers and buckles. Inside, there’s enough capacity for two spare road tubes, tire levers, a small multi-tool, and a CO2 canister. The exterior of the tool bag is protected by a tough, lightweight fabric that’s completely waterproof. Reflective graphics and a light attachment point add visibility in low light. Features - Ultralight construction, weighing only 40g - Hypalon-reinforced Velcro strap gives a secure hold in all conditions - Wide opening, allowing easy access to contents when detached - Light attachment point and reflective graphics for increased visibility - Lightweight waterproof laminate, developed specifically for Apidura Materials - The tool bag is cut from a three-layer laminate fabric that was developed specifically for Apidura. The material is lightweight, and is highly resistant to tears and abrasion. Notably, it’s welded together at the seams, creating a watertight seal that ensures complete waterproofing. - The tool bag’s strap is reinforced with Hypalon, a rubberized nylon used to provide extra protection against friction and abrasion. Care - Wash the tool bag by hand, using a mild diluted soap if necessary. Afterwards, let it air dry. - Do not machine wash, machine dry, or iron.

The quintessential bikepacking bag for the great outdoors. The Backcountry Saddle Pack is an essential partner for bikepacking trips in the wilderness. Designed to hold light, compressible clothes and gear on off-road rides, the Pack provides a spacious compartment under the saddle, eliminating the need for a rear rack. It’s held securely by a stable three-point attachment system, ensuring maximum comfort. The all-weather fabric offers unparalleled resistance to abrasion and tears, and it’s also simple to pack down. There’s a bungee cord for spare clothing, while reflective graphics and two light attachment points mean that there’s no need to compromise on safety. The roll-down compression and closure system mean the Pack’s volume can be tailored precisely to fit a range of packing needs. The Backcountry Saddle Pack is made from Dimension-Polyant VX21, a four-layer laminated fabric originally developed for the maritime industry. Designed to fit the demands of off-road riding, the material combines waterproofing, light weight, low stretch, and high abrasion and tear resistance. The base of the Saddle Pack and Velcro straps are reinforced with Hypalon, a durable rubberized nylon that provides extra protection against friction and puncture. For the compression straps, Woojin buckles have been chosen for their strength and reliability. A lightweight molded section of HDPE thermoplastic sits in the lower section of the Saddle Pack to reinforce its structure.

The Expedition Saddle Pack is lightweight, waterproof, and provides a spacious compartment under the saddle, eliminating the need for a rear rack. It’s designed to hold clothes and equipment on long distance rides. Built from a lightweight laminate developed specifically for Apidura, the Pack is highly resistant to abrasions and tears. The seams have been welded together, creating a waterproof seal that ensures contents always stay dry, even in sustained rain. A three-point attachment system with Hypalon-reinforced Velcro straps allows the Pack to hug the seat post, increasing stability and cutting down on lateral movement. Additional Hypalon on the Pack’s body keeps frames in good condition. The roll-down compression and closure system means the Pack’s volume can be tailored precisely to fit a range of packing needs. Materials The Expedition Saddle Pack is cut from a three-layer laminate fabric that was developed specifically for us. The material is lightweight, and is highly resistant to tears and abrasion. Notably, it’s welded together at the seams, creating a watertight seal that ensures complete waterproofing. The Pack’s attachment points are reinforced with Hypalon, a rubberized nylon used to provide extra protection against friction and abrasion. For the straps, Woojin buckles have been chosen for their strength and reliability. Finally, a lightweight moulded section of HDPE thermoplastic sits in the Pack’s lower section to reinforce its structure.

The Racing Saddle Pack is the first rear pack dedicated to ultra-distance competition and audax. Featuring a sleek design with a compact capacity, the Pack is ideal for storing light, compressible items over vast distances. Constructed from an ultralight, waterproof laminate developed for Apidura. The Pack weighs less than 210g and securely fastens with a sturdy three-point attachment system. It’s designed to fit ergonomically under the saddle, minimizing sway and reducing drag. Light attachment points are laser-cut into the fabric, increasing rider safety without adding unnecessary weight. A high-contrast reflective feature is specially designed to enhance visibility in all light conditions. A roll-top closure provides adjustable capacity, and tailored webbing, straps and buckles shed extra weight, while ensuring the simplest setup for ease of use, when every second matters. Materials The Racing Saddle Pack is made from Hexalon, a bespoke laminated fabric developed specifically for Apidura. Designed to fit the demands of ultra-distance competition and audax, the material is waterproof and lightweight, with strong tear and abrasion resistance. The attachment points are reinforced with Hypalon, a durable rubberized nylon that provides extra protection against friction and puncture. For the fastening system, we’ve chosen Woojin buckles for strength and reliability.

A lightweight under-the-seat bag for carrying ride essentials. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. - Volume 0.5 L / 29 cu in - Weight 57g / 0.13 lbs - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating - Red interior liner improves internal visibility - Lightweight Velcro saddle mounting system can be cinched down to ensure a quiet load - Zippered flap opening for easy access to bag contents while bag is on bike - Interior ID pocket - Ultra-visible 3M triangle logo - LED light clip

A lightweight under-the-seat bag for carrying ride essentials. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. - Volume 0.8 L / 51 cu in - Weight 72g / 0.16 lbs - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating; Red interior liner improves internal visibility - Lightweight Velcro saddle-mounting system can be cinched down to ensure a quiet load - Zippered flap opening for easy access to bag contents while bag is on bike - Interior ID pocket - Ultra-visible 3M triangle logo - LED light clip

A lightweight under-the-seat bag for carrying ride essentials. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. - Volume 1.3 L / 79 cu in - Weight 93g / 0.21 lbs - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating and a red interior liner to improve internal visibility - Lightweight Velcro saddle mounting system can be cinched down to ensure a quiet load - Zippered flap opening for easy access to bag contents while bag is on bike - Interior credit card / ID pocket - Ultra-visible 3M triangle logo - LED light clip

A high-volume under-the-seat bag and water bottle pocket designed specifically for the gran fondo cyclist. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. CONSTRUCTION - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating - Red interior liner improves internal visibility MOUNTING SYSTEM - Lightweight Velcro saddle-mounting system ADDED BENEFIT - Zippered flap opening for easy access to bag contents while bag is on bike - Interior credit card / ID pocket - Integrated waterbottle holder - Ultra-visible 3M triangle logo - LED light clip - Volume 1.3 L / 79 cu in - Weight 126g / 0.28 lbs

A weather-resistant, bikepacking-inspired / urban-inspired seat pack bag Ideal for day-trippers or commuting trunk bag users who don’t want to use a rack. CONSTRUCTION - OCEANWEAVE® 600D reclaimed fishnet polyester with waterproof polyurethane coating. - Water-resistant stitched construction. MOUNTING SYSTEM - Heavy-duty seat rail buckle and straps, pull up to tighten. - 2 rubberized, modular seatpost straps with CAMLOCK, ensure things stay tight, while eliminating potential damage to clothing. FEATURES - Supplemental rear closure strap system provides additional support. - Ultra-visible rear 3M® triangle logo. - Polypropylene plates below saddle, ensure ample leg clearance, even if heavily loaded. - Rear light clip. - Lifetime warranty

Oceanweave 600D reclaimed fishnet polyester with waterproof polyurethane coating. - Heavy-duty seat rail buckle and straps pull up to tighten. - 3 rubberized modular seatpost straps with Camlock ensure things stay tight while eliminating potential damage to clothing. - Top mount bungee system with wings provides optimum stability to top loads etc. - Top bungee system for additional flexible storage. - Supplemental rear closure strap system provides additional support. - Ultra-visible rear 3M triangle logo. - Polypropylene plates below saddle ensure ample leg clearance even if heavily loaded. - Built-in U-lock holder and rear light clip.

A waterproof, bikepacking-inspired / urban-inspired seat pack bag that is quickly attached/removed via an ingenious quick-release seatpost mounting system. Ideal for the commuting trunk bag user who doesn’t want to use a rack. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - HYDRACORE liner provides an exceptional IPX5 waterproof rating. - Universal Rixen & Kaul CONTOUR MAX seatpost bracket with 2 sets of seatpost clamps. (25-32mm & 32-36mm) – 3kg load rating (not including bag weight). - 8mm Engineered aluminum frame provides stiffness and load stability. - *Not advised for carbon fibre or ultra-lightweight seatposts. - Intuitive waterproof roll-down closure system provides flexible load management. - Front external mesh pocket with Velcro closure. - Outer bungee system with wings, allows excess gear to be carried outside of the main cavity. Ideal for unplanned loads faced by commuters. - Ultra-visible three-way 3M triangle logos. - Polypropylene side stiffeners and dimensional foam top/bottom stiffeners provide additional load stability. - Supplemental rear closure strap system provides additional support. - Built-in U-lock holder. - Rear light clip. - Volume 12L / 732 cu/in - Weight 795g / 1.75 lbs (incl. bracket), 725g / 1.6 lbs (without bracket) - Dimensions 44x18x16-inches / 17.3-inches x7.1-inches x6.3-inches

Just the basics. No more, no less. A tiny bag with big potential. Together with tough materials, an internal pocket and a built in light loop the Grid MTB is large enough to fit an MTB tube or a multi-tool, 2 tire levers and a CO2 inflator. - Padded structure keeps its shape - Coated zipper, tail light loop, internal pocket - 14oz/0.4L/24cu in. capacity - Welded seam construction - Hook and loop attachment - Weight: 31 grams

Together with tough materials, an internal pocket, and Blackburn's built-in reflectivity, the Grid Small is perfect for road cyclists. The Grid Small is big enough to fit a road tube, a multi-tool, 2 tire levers, and a CO2 inflator w/cartridge. - Tail Light Loop - Water Resistant Zippers - Retro Reflective Material - Robust, Abrasion-Resistant Outer - .45 Liter capacity - Weight: 55g

Get your payload out of your jersey and under the seat! Built with tough materials, an internal pocket, and retro reflective technology, the Grid Medium seat bag is big enough to fit 2 road tubes, a multi-tool, 2 tire levers, and a CO2 inflator w/cartridge. - Fully reflective side panels - Padded structure keeps its shape - Coated zipper, tail light loop, internal pocket - 21oz/0.6L/36cu in capacity - Welded seam construction - Anti-chafe straps - Weight: 70 grams

Blackburn's biggest seat bag is built to bring it all with you. The Grid Large is spec'd with tough materials, an internal pocket/removeable divider, and is covered with reflective technology. Big enough to fit a jacket or 3 road tubes, a multi-tool, 2 tire levers and a CO2 inflator with a cartridge. A removable divider allows for easy organization. - Reflective material - Padded structure keeps its shape - Coated zipper, tail light loop, internal pocket - 48oz/1.4L/85cu in capacity - Weight: 130g

Customize the Switch Wrap Bag and load it up with your favorite tools. - Compact design—despite its near-limitless functionality, the big switch ratchet tool (sold separately) fits compactly in your hand thanks to a well-thought-out modular design allowing for leverage within the confines of a portable nylon wallet. - Customizable—wrap almost anything you need and take it with you. - Features specific sleeves for an inner tube, a 20g C02 cartridge, 2 tire levers, credit cards, and cash (sold separately) - Weight: 3.52oz - Lifetime warranty

Imagine if you could bring a tool box with all the essentials you’d need for bicycle maintenance with you on every ride. Well then, stop dreaming: the Blackburn Switch Wrap is already here. Spec’d with their Big Switch multi tool, the Switch Wrap provides you quick access to everything you’ll need to fix just about anything that could go wrong on a ride. The Wrap features specific sleeves for an inner tube, up to a 20g CO2 cartridge, and a tire lever. And, it keeps the Big Switch tools at your fingertips. When opened, the tool kit hangs from your saddle so you can grab what you need without spreading it all on the ground, so lost tools will only exist in nightmares. Minimal. Compact. Secure. Convenient. The Switch Wrap. - 15 functions - Includes T or L handle wrenches. - Tool bits include: T25, T30, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm and a flathead. - Nylon carrying pouch features sleeves for 20g CO2 cartridge, tire lever and includes a stash for your I.D., credit card and cash. - Attaches to seat rails or to bicycle frame. - 186g

Going for a ride but don't know what to pack? No problem, Blackburn has you covered. The new Local CO2 Ride Kit offers up what you need to get home, and extra carrying capacity to bring along anything else. - Local Small seat bag offers extra space to pack your tube, wallet, phone, or whatever you want - Wayside CO2 inflator with 16g cartridge - GRID 8 Mutli-tool provides a quality tool to make sure your bike is adjusted properly for your ride - 2x tire levers

Ride essentials. Going for a ride but don’t know what to pack? No problem; we’ve got you covered. The local ride kit offers up what you need to get home; and extra carrying capacity to bring along anything else. With a seatbag, mini pump, mini tool and tire levers, this little kit, bundled in a compact package, has all the tools you need to get out there and keep going. - Blackburn's Local Seat Bag (Medium) offers extra space to pack your tube, wallet, phone, or whatever you want - Blackburn Heist 6 Multi Tool provides a quality tool to make sure your bike is adjusted properly for your ride - Blackburn's Mountain AnyValve Mini-Pump comes equipped with their popular and proven AnyValve head, which works on Presta, Schrader, and Dunlop valves. - 2x tire levers

Blackburn's Outpost Seat Pack w/Dry Bag is a great alternative to panniers or a backpack. It is ideal for mountain bike overnight trips, but also works well for commuting or long day trips. - Expandable - Sometimes you need more space, while other times you need less. This bag expands to accommodate both. - Bag Fit - Bikes come in a lot of shapes and sizes. This bag includes adjustable mounting systems to allow fitment to almost ANY bike. - Also works with many standard dry bags and stuff sacks. Not recommended for carbon seatposts. - Daisy chain loop webbing provides extra opportunities to attach lights or other gear. - Volume 11.0 liters / 671 cu/in - Weight 1.33 lbs

We developed our Outpost Elite Universal Seat Pack (USP) to work with dropper or standard seatposts, be able to carry a bevy of cargo, and be stable enough to not swing around while it does. The USP is a two-part system: Part 1 is a T6061 Alloy Wing that affixes to your saddle and works with a standard or dropper post. Part 2 is a removable and waterproof dry bag. The bag has a scuba-style air bleed valve to assist with compression while off the bike. The wing stays on the bike, the bag comes off and allows you to pack, compress and go ride in the snap of a few buckles. Dropper Compatible Designed to not only stabilize your seatpack, but also work with or without dropper posts. The t6061 aluminum wing bolts to your seat rails for a rock solid mount. Get the perfect cargo fit for the roughest trails. Harness System This bag features a system that is comprised of an outer "Harness" that securely carries an inner bag. The inner bag can quickly and easily be removed from harness, without having to detach the harness from the bike. The advantage is that is saves time, is more secure and allows you to carry odd/oversized items or use your favorite aftermarket bags. Bleed Valve The waterproof dry bag features a scuba style air bleed valve so that you can pack your bag as tight as you need, and not have to worry about leaks. Welded Seam Construction Welded seams not only reduce bulk, weight and materials, they improve performance by eliminating the needle hole, a potential area for saturation and leakage. Welded seams also create a clean finish on both the interior and exterior of the bag. No Sway Able to carry a bevy of cargo, and stable enough to not swing around while it does. - Weight: 21.12oz - Capacity: 5.25L / 6.95L Expanded - Lifetime warranty

Budget-focused riders can journey with confidence knowing the Comp Seat Bag will keep essentials are close at hand. • Hook and loop straps attach pack securely to seat rails and seatpost • Angled zippered opening makes access to contents easier when bag is fitted tight • Taillight tab for increased visibility • 100% polyester

Key features: - Hook and loop saddle attachment firmly keeps bag connected to your bike - Internal pockets securely hold credit cards and valuables - Reflective elements enhance visibility for maximum safety anytime - Light and robust material holds up to elements without contaminating contents - 23 cu. in. (380cc) capacity

Key features: - Hook and loop saddle attachment firmly keeps bag connected to your bike - Low-profile seatpost attachment prevents bag from swinging while riding - Internal pockets securely hold credit cards and valuables - Loop on face of bag easily attaches clips for rear lights - Reflective elements enhance visibility for maximum safety anytime - Light and robust material holds up to elements without contaminating contents - 40 cu. in. (650cc) capacity

Key features: - Hook and loop saddle attachment firmly keeps bag connected to your bike - Low-profile seatpost attachment prevents bag from swinging while riding - Internal pockets securely hold credit cards and valuables - Loop on face of bag easily attaches clips for rear lights - Reflective elements enhance visibility for maximum safety anytime - Light and robust material holds up to elements without contaminating contents - 57 cu. in. (940cc) capacity

For the essentials and more The Bontrager Pro Quick Cleat Seat Pack is for riders on-the-go. The Quick Cleat attachment system makes it easy to switch packs from bike to bike or take your essentials with you after rides end. Built with durable nylon to handle road grime from awesome adventures, its lightweight construction cradles your essentials through your favorite rides. Key features - Install and removes in seconds with convenient Quick Cleat attachment - Internal pocket securely hold credit cards and valuables - Loop on face of bag easily attaches clips for rear lights - Reflective elements enhance visibility to be seen at night - Light and robust material holds up to elements without contaminating contents - Compatible with most carbon saddle rails - 40 cu. in. (650cc) capacity Details - Fiber Content: 82.7% Nylon PU coating / 17.3% Hypalon

Key features: - Hook and loop saddle attachment firmly keeps bag connected to your bike - Low-profile seatpost attachment prevents bag from swinging while riding - Internal pockets securely hold credit cards and valuables - Loop on face of bag easily attaches clips for rear lights - Reflective elements enhance visibility for maximum safety anytime - Light and robust material holds up to elements without contaminating contents - 85 cu. in. (1385cc) capacity

Just enough extra space The Bontrager Pro Quick Cleat Seat Pack is for riders on-the-go. The Quick Cleat attachment system makes it easy to switch packs from bike to bike or take your essentials with you after rides end. Built with durable nylon to handle road grime from awesome adventures, its lightweight construction cradles your essentials through your favorite rides. Key features - Install and removes in seconds with convenient Quick Cleat attachment - Internal pocket securely hold credit cards and valuables - Loop on face of bag easily attaches clips for rear lights - Reflective elements enhance visibility to be seen at night - Light and robust material holds up to elements without contaminating contents - Compatible with most carbon saddle rails - 57 cu. in. (940cc) capacity Details - Fiber Content: 84.1% Nylon PU coating / 15.9% Hypalon

Key features: - Hook and loop saddle attachment firmly keeps bag connected to your bike - Low-profile seatpost attachment prevents bag from swinging while riding - Internal pockets securely hold credit cards and valuables - Loop on face of bag easily attaches clips for rear lights - Zippered expansion allows for extra storage space - Light and robust material holds up to elements without contaminating contents - 105 cu. in. (1.7L) capacity - 142 cu. in. (2.23L) capacity when expanded