Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

CO2 Inflators

Vittoria Pit Stop Tire Sealant
$16.99 - $23.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
Specialized MTN Tube Spool
$29.99 - $50.00
The MTN Tube Spool is a simple, compact system that'll carry everything you need to fix a flat without weighing you down. To do so, its design allows for a spare tube, with up to a 48mm valve stem, to be rolled-up without damaging the tube. Meanwhile, the Spool can easily hold a lever, CO2 cartridge, and a valve head. - Ingenious design allows the spare tube to be rolled up, while protecting valve stem from rubbing a hole through the rubber. - CO2 valve head and two-sided tire lever snap into place for compact and secure storage. - Holds a single threaded 25g CO2 cartridge. - Fits up to 48mm long tube valve stems. - Hook and loop strap can slide side to side to accommodate all different size mountain tubes
Specialized Road Tube Spool
$25.00 - $30.00
A simple, compact system to carry everything you need to fix a flat without weighing you down. - Patent pending design allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber - CO2 valve head and 2-sided tire lever snap into place for compact and secure storage - Holds a single threaded 16g CO2 cartridge - Fits up to 80mm long tube valve stems
Specialized SWAT Mini CO2 Head
$15.00
90 Degree twist style mini CO2 head used on SWAT products - Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow. - Flow can be controlled or stopped by threading cartridge back into head. - Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.
Lezyne Trigger Drive CO2
$29.99 - $32.99
CNC machined aluminum dispenser with brass internals. Trigger Valve Operation for easy and controlled inflation. Twin Chuck head threads on to Presta and Schrader valves. Neoprene sleeve insulates hand from cold during discharge. Compatible with threaded CO2 cartridges. Includes one 16g cartridge. - Weight: 26g - Aluminum, a strong, lightweight, and durable material, is used to make various precision CO2 inflator components - CNC machined aluminum parts for precise and durable construction - Press on/off valve operation functions like a trigger, providing easy and precise inflation - Lezyne's ABS Flex Hose threads directly onto the valve for a secure, airtight connection. Compatible with Presta, and Schrader valves
Giant Clutch Fork Storage Kit
$54.99
INVISIBLE INFLATION. Lightweight, firmly attached and quiet, but easily accessible when you need it, the Giant Clutch Fork Storage kit fits a CO2 cartridge and inflator right into your fork’s steerer tube and helps you ride pack-free. FEATURES Invisible until you need it Multiple taper mounting design Rubber mallet installation, no need for any glue or adhesive Compatible with RockShox, Fox and DVO forks Carries a 16g or 25g CO2 cartridge and inflator (cartridges sold separately) SPECIFICATIONS Tools: 16g or 25g CO2 Cartridge, CO2 inflator Sizes: 160 x 40 x 21mm System: Compatible with RockShox & Fox & DVO Forks Colors: Matte Black Weight: 118g (with a 25g CO2 cartridge) Material: Aluminum
Crank Brothers Klic HV + CO2
$61.99
The high-volume portable hand pump with hidden magnetic hose and Co2 adaptor. - Premium pump with flexible rubber hose to allow for easy inflation - Features include a presta/schrader valve adapter, magnetic head with twisting collar, and a folding and locking handle - Hv (high volume) version recommended for tires 1.8” wide and larger - All klic pumps come with a bottle cage bracket mount - Length: 220mm - Pressure: 110psi / 7.6 bar - Warranty: 5 years - Weight: 124g (pump only)
Topeak AirBooster Race Pod CO2 Inflation System
$57.99
Topeak's AirBooster Race Pod is a compact and completely self-contained tire inflation kit featuring an AirBooster CO2 inflator, two tire levers, two 16g CO2 cartridges, and a mounting module with strap and neoprene bag. The unique mounting module straps to the seatpost, seat tube, and provides lightning fast access to the AirBooster inflator, extra CO2 cartridge, and tire levers. The Airbooster Race Pod is the perfect CO2 tire repair solution for racing or endurance events.
Topeak Airbooster G2 CO2 Inflator
$57.99
The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately
Topeak CO2-Bra CO2 Inflator
$43.99
Topeak's CO2-Bra CO2 Inflator gives you speed and convenience when it's time to fix a flat. A flip-up thumb lever puts precise flow control in your hands while the ergonomic handle gives you a better grip while inflating. An integrated safety ring prevents accidental cartridge puncture during storage. The CO2-Bra accepts threaded 16g cartridges and works with both Schrader and Presta valves.
Topeak TubiBooster
$89.99
2 in 1 design! This unique product works like a mini air compressor that allows any floor pump to compress air into the 1000cc aluminum air tank. Then, it quickly releases a high volume of air to mount tubeless tire beads. The aluminum TubiBooster head also works as a CO2 inflator, compatible with Topeak threaded 16g/25g CO2 cartridges. - Pump Head Compatibility: Presta pumps - Tire Valve Compatibility: Presta / Schrader valves, Push to inflate - Air Tank: One liter, Store up to 200psi / 14bar air pressure (varies with the pump capacity) - Working Pressure - 1800psi / 124bar - Compatible with Topeak threaded 16g / 25g CO2 cartridges - Material: Aluminum
Specialized Air Tool C02 Mini Kit (16-gram)
$30.00
All the basics in one small, elegant package: that's Specialized's Air Tool C02 Mini Kit. A 16-gram C02 cartridge, a thread-on inflator head, and a tire lever are all fastened to your seat post with a fast and easy rubber strap. The front of the mounting system even holds two glueless patches for emergencies.
Specialized Air Tool C02 Mini Kit (25-gram)
$33.00
All the basics in one small, elegant package: that's Specialized's Air Tool C02 Mini Kit. A 25g C02 cartridge, a thread-on inflator head, and a tire lever are all fastened to your seat post with a fast and easy rubber strap. The front of the mounting system even holds two glueless patches for emergencies.
Specialized CPRO2 Pump
$30.00
Get the convenience of CO2 inflation in a super-small pump that can be carried anywhere with Specialized's Cpr02 Pump. This little inflator boasts speedy, controlled inflation with the power of compressed CO2 and uses threaded cartridges
Specialized CPRO2 Trigger With Gauge
$55.00
The easiest way to use CO2. - Gauge confirms proper inflation, making it easy to adjust pressure mid-ride. - Thumb trigger gives precise control. - Accommodates threaded 16g and 25g cartridges. - One 16g CO2 cartridge included.
Specialized Threaded CO2 Cartridges (3-Pack)
$15.00 - $24.00
Specialized's Threaded CO2 Cartrdiges can be used with Specialized CPRO2 Trigger and Air Tool COMBO2 pump inflators.
Serfas 16-Gram CO2 Threaded Cartridges
$7.99
These compact, threaded 16-gram cartridges work with compatible CO2 inflators and easily packs into your seat bag.
SKS TL-Head Set
$41.24
The TL-Head Set pump head is a new solution from SKS for all tubeless tire inflation. It is compatible with SKS floor pumps and all others with a 5.0-5.7mm hose size. The TL-Head Set can be used both for conventional pumping and with CO2 cartridges for a simple seating of tubeless tires. It comes in a practical set containing 2 tire levers and 2 16g CO2 cartridges. - Includes TL-Head, two 216g threaded cartridges and two tire levers - Compatible with Presta, Schrader and Dunlop valves
Profile Design CO2 Mounting Bracket
$21.99
Profile Design's CO2 Mounting Bracket is a small, light holder that attaches to any Profile rear-mounted drink system or under any bottle cage. Once in place, the bracket provides a handy place to carry a CO2 refill cartridge for your CO2 inflator (Profile drink system, bottles, CO2 cartridges and inflators sold separately).
Pro Micro C02 Inflator
$41.99
- Super compact and minimalistic design - Easy to use with the controllable internal spring valve system - Reliable system for quick and easy inflation - Includes one 16g threaded Co2 cartridge - Presta and Schrader compatible
Lezyne Alloy Drive CO2
$44.99
Lezyne's easy-to-use Alloy Drive CO2 is super compact and portable. Its simple triggered operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible and works with 16g threaded cartridges.
Lezyne Flow Storage Adapter
$72.99
Integrated stainless steel storage bracket that fits under a bottle cage. Holds included Twin Speed Drive CO2 head, V5 multi tool, two CO2 cartridges and two Matrix levers. Not available with CO2 cartridges in all countries. Weight: 95g /311g Loaded
Lezyne Flow Storage Adapter Without CO2 Cartridges
$64.99
Integrated stainless steel storage bracket that fits under a bottle cage. Holds included Twin Speed Drive CO2 head, V5 multi tool, and two Matrix levers. It will also hold two CO2 cartridges (sold separately). - Weight: 95g /311g Loaded
Lezyne Twin Kit
$49.99
Lezyne's convenient Twin Kit includes their Twin Speed Drive CO2 inflator, two CO2 cartridges, a couple tire levers and a Velcro strap to keep it all together. Its aluminum head is compatible with both Presta and Schrader valves, and uses a simple twisting action for easy inflation. And, it accepts all threaded CO2 cartridges.
Genuine Innovations 16-Gram Threaded CO2 Cartridges (6-pack)
$27.99
These threaded 16-gram cartridges can be used with all Genuine Innovations inflators that have a 3/8-inch-24 thread.
Genuine Innovations 20-Gram Threaded CO2 Cartridges (6-pack)
$36.49
The Genuine Innovations 20-Gram Threaded CO2 Cartridges can be used with all Genuine Innovations inflators that have a 3/8-inch-24 thread. The 20-gram size will fully inflate those high-volume mountain bike tires (29er, DH, etc.).
Genuine Innovations AirChuck Elite CO2 Tire Inflator
$39.99
Genuine Innovations' AirChuck Elite offers Push-To-Inflate technology for fast, easy & controllable single-handed CO2 bicycle tire inflation! • Cartridge compatibility: 12, 16, 20, 25 gram threaded CO2 cartridges & Big Air! (not 45-gram cartridges) (each sold separately) • All metal aluminum design • Easy to use and fully controllable • Push-to-Inflate technology • Works with both Presta and Schrader valves • Includes one 16 gram and one 20 gram threaded CO2 cartridge • Weight: 16 grams
Genuine Innovations CO2 Refill Cartridges (20-pack)
$69.99 - $119.99
- Standard threaded cartridges are 3/8" x 24tpi thread to fit any brand inflator - Law prohibits ORM-D materials from shipping by air - Box includes 20 CO2 cartridges
Genuine Innovations Deluxe Tire Repair & Inflation Kit
$48.99
The Genuine Innovations deluxe kit offers a complete CO2 bicycle tire repair and inflation solution for all your flat tire needs. Comes with everything needed to repair and inflate multiple flat tires, all packed in an easy-to-store zippered wallet. Featuring the popular Ultraflate cupped inflator, this deluxe repair kit is so quick and easy to use, you'll be back to riding your bike in no time! - Repair and inflate multiple tires - Quick inflation - Compact and stores easily - Full kit weight: 292 grams - Compatible with non-threaded 20 gram CO2 cartridges and threaded 16 gram, 20 gram and 25 gram CO2 cartridges - Works with both Presta and Schrader valves - Store a non-threaded 20 gram CO2 cartridge in the cup Includes: (1) Ultraflate inflator with trigger-controlled technology (3) 20 gram non-threaded CO2 cartridges (1) Small patch kit (6 patches and 1" square sand paper) (2) Tire levers (1) 5.5" L x 6.5" W padded, zippered wallet
Genuine Innovations HammerHead
$33.99
The most intuitive CO2 inflator on the market. All you have to do is twist your favorite CO2 cartridge into the HammerHead, and at the push of a button, you're back on the trail. As an added bonus, the HammerHead automatically detects your valve type for instant valve attachment while the trigger head leverages our patented push-to-inflate technology. - Easy and controllable inflation - Push-to-inflate technology - Auto detect head for instant Presta or Schrader valve attachment - Lightweight, compact design - Weight: 26 grams Includes: (1) HammerHead inflator (1) threaded 20 gram CO2 cartridge
Page 1 of 2 Next page