The Missile EVO is a full UD Carbon aerodynamic design that meets UCI requirements. It's ideal for applications where optimizing aerodynamics is critical. - Wide adjustability of armpads and extensions for optimal ergonomic and aerodynamic positions - Integrated brake and shift cable routing (Also for Shimano Di2) - Weight: 595g
This is an aerobar defined by fit. Unlike aerobars of the past that had their fit and adjustability range restricted by design and construction, the Aeria Ultimate places fit first. The Aeria Ultimate is a durable, low profile carbon aerobar designed with an expandable adjustability range and custom fit for the ideal TT setup for each individual rider’s body type. It features an extensive range of independent adjustment of reach and width in the smallest increments, stack adjustment with lowest stack available without extensions placed below the basebar, and built-in tilt adjustment of the integrated bracket allowing the armrests to be rotated separately from the extensions without adding stack height. - Reach adjustment range: Increments of 7.5mm with range of 92mm fore/aft - Adjustable stack of 25 to 105mm in 5mm increments to achieve the same pad stack as aerobars with extensions placed below the basebar - All dimensional adjustments are independent of each other to achieve desired fit with no need to calculate adjustments in order to make changes - Tilt adjustment is built into the pad/extension bracket with a range up to 15 degrees - rotating the armrests separate from the extensions improves overall aerodynamics without raising stack height - Includes F-40 Armrest with offset bolt pattern featuring nine times fore/aft positioning with 67.5mm adjustment range, 18,5mm width adjustment between position, and 15 degrees rotational adjustment - Stem sold separately Tech specs: - Bracket: Aeria Ultimate Forged - Stack: 25mm to 105mm (5mm Increments) - Reach: -21mm to 92mm (7.5mm Increments) - Width: 125mm to 252mm (18.5mm Increments) - Extension Length Adjustment: 230mm to 337mm (Center of Basebar to Tip) - Extension Length: 378mm - Extension Height: 71mm - Extension Angle: 30° (For T4+ Carbon) - Bracket Tilt Adjustment: 0-15° - Weight: 910g (without stem or armrest risers)
$578.99 - $1,444.99
When you're in it to win it, you need Profile Design's Aeria Wing Aero Bars! Designed for maximum aerodynamics, amazing adjustability and superior handling, this beautiful front end sets a new standard. For the ideal blend of power, control and aerodynamics it boasts Profile's high-modulus carbon wing base bar with ergonomic grips, stackable risers for fine-tuning armrest and extension height, their F25 armrests that can be rotated and moved fore/aft, and their T2+ carbon extensions that also are fully adjustable. This all means that you can dial in the ultimate fit to fly down the road and change it as you get stronger, more flexible and even faster! Plus, the carbon construction means lightness and stiffness for excellent support and handling when you're hammering along setting a new PR. And, to make your bike cheat the wind even more you also get multiple drillings for internal cable routing and electronic Di2 compatibility.
Zipp's Vuka Aero redefines aero handlebar conventions while being compatible with modern-day aero bikes. The current redesigned Vuka Aero builds on the technological foundation of aero excellence set by the original version. Vuka Aero is an integrated aero bar that features leading adjustability; can be used with any stem to help you find your ideal position on the bike. The SRAM eTap AXS Blip Box fits neatly within the center cap, keeping it out of the wind and out of sight for a clean and efficient cockpit. The airfoil used in the Vuka Aero is based on the shape of the SL-70 Aero road bar. The result is an aero bar that's stiff and streamlined while maintaining the UCI's 3:1 aspect ratio requirement. - Vuka Aero ships with base bar, extension clamp, and armrest clamp - Extensions sold separately - New Center cap has an integrated mount for the SRAM eTap AXS Blip Box and keeps it hidden and out of the wind - Wide range of adjustment - Works on a wide range of integrated bikes - Works with any 31.8 clamp stem - Removable center cap, placed in front of the stem, adds 5 percent stiffness to the aero bar and integrates seamlessly to the base bar. - Integrated Carbon Aerobar works with any 31.8 clamp stem - Integrated SRAM eTap AXS Blip box mount in the Center Cap - Rapid Routing cable exits are positioned for easy installation of brake cables - ISO 4210 compliant. See Declaration of Conformity for detail - Drop: 0mm - Clip compatible Integrated - Width (center-to-center): 40cm - Brake lever compatibility: Plug Style - Clamp width: 52mm
Everyone's biometrics are different; no two cyclists should conform to the same TT set up. Comfort (we're talking about power-production) combined with aerodynamics, yields speed. You need the combined forces of both, and to do so you need to find your optimal position, which is why 3T designed their Vola LTD cockpit to be highly adjustable, not to mention light, stiff, and aero. - Narrow, aero-optimized base bars are built with 3T's HM carbon, cutting weight by huge margins - The super-low aero position favored by time trial specialists is possible with extension clamps mounted on the underside of the base bar - Arm pad stack height above the stem center line ranges from 30mm in the low position, to 97mm using all the included spacers in the top-mounted position - Width between the arm pads ranges 220—340mm, measured at pad outer edge - Arm pad reach can be set 20—70 mm ahead of the basebar center, measured at pad front edge - The arm pads rotate in their clamps -A reinforcing bridge is included for rigid, shake-free set-up, that can also double as a convenient computer clamp - Carbon aero extensions - Carbon base bars - Carbon 3T Comfort Cradles with neoprene pads - Weight: 750 grams in the "low position" - UCI legal
The extremely low weight and excellent stiffness of Look's ADH Road Bar make it a favorite among cyclists looking to build their dream bike. Its monocoque construction combines the weight savings, vibration damping, and awesome strength of carbon with Look's comfortable anatomic bend for the ultimate handlebar. The compact drop provides all-day comfort and superb ergonomics. And, this great bar features internal routing for mechanical or electric cables, which keeps your whip clean and aero.
The bullhorn bar was introduced to the cycling world by 3T on Francesco Moser’s hour record bikes. Its design principle hasn’t significantly changed since, until now. The Revo seems so obvious, now, providing a better, safer and more powerful grip for the rider. Then again, good ideas always seem obvious after the fact. Revo is the first-ever aerobar to attach the basebar wing to the front of the grips instead of the back, literally changing aerobar design 180°. The advantages are clear: - The rider’s hands cannot slide forwards off the grips, so it’s safer and easier to use at all times - It offers better grip and handling on tough descents, rough roads and sketchy turns - It improves aerodynamics — the basebar wing has a sharper angle of attack with the free air flow than standard basebars - Wing material: Unidirectional carbon - Extension material: Alloy - Cradle material: Alloy - Pad material: Neoprene - Base bar width (c-c): 400mm - Outside pad width: 240-340mm - Center pad width: 130-230mm - Pad stack: 30-97mm - Pad reach: 20-70mm - Grip inside reach: 72mm - Grip drop: 46mm - Clamp diameter: 31.8mm - Extensions: S-bend - Cradle: New comfort - Weight: 770g (minimum stack) - Finish: Stealth black or black with red accents
The Missile EVO is a full UD Carbon aerodynamic design that meets UCI requirements. It's ideal for applications where optimizing aerodynamics is critical. - Perfectly match with Missile EVO clip-on aero extenders - Including 4 spacer adapters for under bar and top bar mounting - Ideally paired with the Missile EVO stem for optimal aerodynamics and optics - Weight: 295g
The Bontrager XXX Integrated Handlebar/Stem is a one-piece carbon bar/stem combo that brings clean looks and light weight to any road bike. Lightweight 100% OCLV Carbon construction offers a great road feel and control, while calibration marks and a flat front surface ensure easy lever installation. - Seamless accessory integration with Blendr - Flat surface front of bar for clean cable routing - Calibration marks allow precise, accurate and repeatable brake lever position - Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops - 100% OCLV Carbon construction - Internal relief channel eliminates need for additional spacer above stem - Safe for use with carbon and alloy steerer tubes
The Madone is built as a seamlessly integrated machine designed to do one thing: go fast. Trek's Madone Integrated Bar/Stem is an important part of that integration. Available in a variety or widths and reaches so you can dial in your superbike specifically for you. - Compatible with model year 2016/17 Madone - Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops - 100% OCLV carbon fiber construction - Seamless accessory integration with Blendr - Blendr accessory bases and mounts sold separately
The Vibe Aero Superlight handlebar is constructed of a UD carbon fiber layup with Innegra, resulting in a bar that's ready to ride in the harshest conditions. It features an ergonomic oversized top section, compact design, and integrated brake and shift cable routing, perfect match for Shimano Di2.
Vola Team Stealth Essential is a lower-cost model of the award-winning Vola range. It's a complete starter package sharing the same architecture as Vola Team and based on the same 38cm-wide carbon fiber basebar. A super-low position favored by crono specialists is possible with extension clamps mounted on the underside of the basebar. Alternatively, extensions can be mounted above the basebar. Arm pad stack height above the stem centerline ranges from 30mm in the low position to 67mm in the top-mounted position. Width between the new comfort arm pads ranges 220–340mm, measured at pad outer edge. Arm pad reach can be set 20–70mm ahead of the basebar center, measured at pad front edge. Package includes alloy S-bend extensions, width extenders, and stiffness bridge. Riser kits, available as 3T spares, further raise stack height by up to 30mm. All-up weight of Vola Essential is just 700g. Finish with Team Stealth graphics.
Take flight with the power of FSA's K-Wing Compact. This amazing handlebar features a continuous carbon/Kevlar construction for an ideal blend of stiffness, low weight and durability. The compact bend assures easy reach to your controls and a more comfortable grip when in the drops. The K-Wing also features an aero, ergonomic top section and internal cable routing to ensure your bike looks clean and clutter free.
$529.99 - $598.00
Covering huge distances? With its unique shape, FSA's K-Wing Compact handlebar could be just the bar you’re looking for. The drops are the same shape as FSA's other compact bars, but the K-Wing features an Aero-Ergo flat top section that rises from the stem clamp. It’s also slightly swept back, resulting in a shape that follows the natural arc of your arms for enhanced comfort. Also, each width of bar has a proportionally sized top diameter. The carbon/Kevlar composite construction includes internal cable routes that are large enough to handle electronic shift connectors. Due to the outward angle of the drops, FSA road handlebars will be narrower in the brake hoods than the drops. - Weight: 250g - Bar Drop: 125mm - Drop Bend Style: Compact - Bar Reach: 80mm - Material: Carbon - Bar Top Style: Flat - Accessory Mount Diameter: 31.8mm
The Vibe Superlight handlebars feature a compact design and an ergonomic oversized top section for supreme comfort on the road. It's constructed of a super-light UD carbon fiber layup with Innegra fiber. The integrated brake and shift cable routing matches perfectly with Shimano Di2.
Since its introduction, the most common feedback on our Ergonova dropbar was “don’t change a thing”. But observing how our customers ride, we noticed many spend considerable time holding the bars in the corner section, especially while climbing. Designing the corners specifically for this function has created a bar that is supremely comfortable not only on the tops and the drops, but also in this intermediate position. Further redesigns to the hood and drop shapes to accommodate the latest shift/brake levers help to create the new standard in ergonomics - Material: Unidirectional carbon - ultralight layup - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
Superleggera, the lightest 3T drop bar ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 166g - Material: Unidirectional carbon - ultralight layup - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
$499.99 - $568.00
FSA's K-Force Compact Road Handlebar features a racy compact design for improved ergonomics and rider comfort. Its continuous carbon/Kevlar construction is super light and impressively stiff, making it perfect for climbing and big out-of-the-saddle efforts. It also has a 110mm center section for mounting accessories and its reinforced, textured clamping areas hold tight and secure.
Scatto Ltd is a pure track sprinter's bar for elite-level track competition. It offers superb control and handling even in the most hectic races. Australian champion Anna Meares has won many races on this bar, including the Olympic sprint gold medal at London 2012. Wind tunnel tests show that the aerodynamic design produces far less drag than any standard round-section bar. This is achieved at no compromise to strength: Scatto is 50% stiffer than the reference bar formerly used by many of today's medal-winning track sprinters, as well as lighter. Its unique, radical design also imparts a stunning visual signature. Scatto Ltd has a 35cm width with a 128mm drop.
Upgrade the front end of your favorite ride with Thomson's MTB Titanium Handlebars. Besides being light, stiff, corrosion-proof and incredibly durable, titanium damps vibrations for comfort making easy work of rough and challenging terrain. Install these sweet bars on your daily ride, race rig or trail-crusher and enjoy them for years to come.
An ultra-high performance handlebar constructed with Innegra fibers to ride the most punishing conditions. The PRO Vibe handlebar is built to meet cycling’s highest demands using state of the art technology. The Vibe is developed with Di2 in mind offering ultimate integration for maximum aerodynamic performance and ultra-clean styling. The carbon PRO Vibe handlebar series is constructed from high-performance Innegra fiber. The addition of Innegra fibers strengthens the bar’s most vulnerable areas without compromising its weight, so your handlebar is ready to ride the harshest conditions. - UD carbon construction - Integrated brake and shift cable routing (Also for Shimano Di2) - Anatomic and compact design
Bontrager's Race X Lite Carbon Aero Bullhorn is light, strong, ergonomic and a great upgrade for your wind-cheating machine. Its hand-made OCLV carbon construction damps vibrations to quash road buzz and trims grams to give you the lightest aero setup possible. This UCI-legal base bar is compatible with Bontrager clip-ons and aero brake levers, and it uses internal cable routing for a slippery, low-drag profile. And, it boasts a 31.8mm clamp diameter for stiffness that kicks in every time you accelerate.
The Pro Vibe Aero handlebar is built to meet cycling’s highest demands using state of the art technology. It's an ultra-high performance handlebar constructed with Innegra fibers to ride the most punishing conditions and is designed with aerofoil shapes to give you a performance edge on the road. The Vibe Aero is developed with Di2 in mind offering ultimate integration for maximum aerodynamic performance and ultra-clean styling. - Full UD Carbon aerodynamic design that meets UCI requirements - Integrated brake, shift, and Di2 cable routing
$464.99 - $474.99
The Renaissance Man of handlebars, 3T's full carbon Aeronova Team does it all. The mega-wide top section is just barely UCI legal, taking full advantage of the 3:1 rule for maximum aero advantage. The elongated, wing tubing also makes for an ergonomic grip when the road tilts up. Feathery light and stiff, the Aeronova is master of the mountains as well as the finish line chute. Internal cable routing keeps the tape-free tops aero and looking fresh, and 127mm drops for a short and shallow reach provide a confidence boost during sprints and descents.
Since its introduction, the most common feedback on our Ergonova drop bar was “don’t change a thing”. But observing how our customers ride, we noticed many spend considerable time holding the bars in the corner section, especially while climbing. Designing the corners specifically for this function has created a bar that is supremely comfortable not only on the tops and the drops, but also in this intermediate position. Further redesigns to the hood and drop shapes to accommodate the latest shift/brake levers help to create the new standard in ergonomics - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
Superleggera, the lightest 3T drop bar ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 186g - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
With Kevlar-reinforced unidirectional carbon construction, the SL-K Compact handlebar is ready to race. It features the latest evolution of FSA's compact bar shape, with a shallow 125mm drop and gentle flare. A wide center section gives ample room to mount accessories like GPS units or lights (computer mount available separately). The areas where the stem and levers clamp have additional reinforcement and a textured finish to avoid slip. - Unidirectional carbon fiber finish - Kevlar reinforced construction for exceptional strength and durability - FSA road handlebars are measured from center to center of the drops. Due to the outward angle of the drops, FSA road handlebars will be narrower in the brake hoods than the drops - 4-degree outward bend - Bar Drop: 125mm - Bar Reach: 80mm - Weight: 235g
Full carbon fiber road handlebar with thoughtful ergonomics highlighted by a short reach shallow drop geometry and full Di2 compatibility. Who It's For Road riders with a preference for compact geometry, light weight, and refined electronic groupset integration. Why We Made It Because we understand that your ride experience can be established by the comfort and control achieved with a handlebar, we take handlebar design seriously. The ENVE Compact Road Handlebar is available in both a traditional and compact geometry and a variety of width options to meet the fitment needs of most cyclists. Ergonomics of the Road Bars are thoughtful and allow for a wide range of adjustability from tilt to brake/shift lever placement. To round off the finish, the ENVE Compact Road Handlebar can be routed externally for mechanical groupsets but is also drilled for internal electronic routing for modern electronic drivetrains including compatibility with Shimano RS-EW910 bar end plug junction box installations. The Compact Road Handlebar includes ENVE's Integrated Bar End Plugs.
$419.99 - $457.99
Zipp's SL-70 Aero is, in every way, a high-performance bar. This unidirectional carbon handlebar is packed with innovations for best-in-class fit, ergonomics and aerodynamic performance. With its wing-shaped bar top, the SL-70 Aero features Zipp’s most advanced bar refinements while building on the trend-setting aero legacy of the VukaSprint. Beyond aero performance, the SL-70 Aero features a 70mm reach to allow proper fit without compromising stem length and steering control. The 10-degree ramp angle to the brake hoods eliminates the need for up-rotated bars. The bar also provides ample wrist clearance for riding and sprinting in the drops. - Unidirectional carbon construction - Airfoil top bar reduces drag by .63 Newtons over traditional round tube - Drops angled out 4 degrees with 10 degree ramp angle - Features Zipp’s Rapid Routing system, also used in the Vuka Aero system, for easy internal cable routing. UCI legal. - Compatible with all mechanical brake/gear systems and all electronic gear systems. - Not clip compatible.
Unparalleled ride quality XXX is a testament to the power of judicious carbon composite engineering. Not only is it incredibly light and stiff, but its OCLV Carbon construction also offers an unparalleled ride quality. The Unique Variable Radius Compact bend creates the ideal hand position for quick transitions from the tops to the drops. Key features - OCLV Carbon fiber construction - Variable Radius Compact (VR-C) design allows shorter reach and drop - Laser-etched brake lever position lines for spot-on control setup
Page 1 of 6 Next page