Forks & Suspension
Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.
$53.99 - $149.99
The feel of riding and durability are two decisive factors when designing seals for forks in motorcycles and bicycles. Especially in off-road applications, such as enduro or motocross, the requirements on the sealing are very demanding. SKF has developed a range of seals with this in mind. Solutions are available for both off-road and on highway use. For motorcycles, the seals come in pairs with a separate oil seal and dirt wiper seal tuned to each other to give low friction for the best riding experience, as well as long life. For bicycles the two seals can be combined into a single unit. Features An oil seal and a wiper seal to minimize contamination reaching the oil seal. Specially developed NBR elastomer with lower friction characteristics. Wiper seal with optional dual lip design for high contamination situations. New oil seal lip geometry specific to fork seals. Benefits Increased life and performance Enhanced water and dirt protection capability Reduced and constant friction over the life of seal Much improved ride comfort Compatibility with a wide range of OE and aftermarket oils Reduced wear and air suction
Maintenance kit for : Altitude 2013 - 2016 Instinct 2014 - 2017 Pipeline 2016 - 2017 —— Note - This kit is for bikes with the BC2 link, the BC2 will contain grease ports.
Shock bearing eyelet kit for: Thunderbolt Carbon 2018-2020 Thunderbolt Alloy 2019-2020 Instinct 2018-2020 Pipeline 2018-2019 Altitude 2018-2020 Slayer 2020
Inner chip for legacy RIDE-9 System: Altitude 2013-2016 Instinct 2013-2017 Pipeline 2017 Thunderbolt MSL 2015-2017 Thunderbolt Alloy 730 to 750 2016-2018
For 2016-17: Altitude Instinct Pipeline 20mm ID 12 per bike
Bearing eyelet kit for : Slayer 2017-2019
Bearing kit for : Slayer 2017-2019
$21.99 - $54.99
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
$1,270.00 - $1,355.00
Designed not only for the race down but the also ride up. Holding onto every critical line, Lyrik Ultimate features an updated DebonAir air spring paired with our Charger 2.1 damper for unmatched trail control and precision. Ultra-low friction SKF wiper seals and Maxima Plush damping fluid all work overtime to reduce friction, silence noise, and provide unmatched fork performance sunup to sundown. - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail - Charger 2.1 RC2 damper featuring independent high and low-speed compression adjust - Charger 2.1 RCT3 damper featuring 3-position compression adjust (open/pedal/firm) with low-speed compression adjust - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Ultimate foil graphics package
$485.00 - $519.99
Featuring silky smooth travel in a new lightweight design, Monarch floats through bumps even better than before, turning rugged trails into tire-gripping velvet. The chassis is lean while maintaining the durability and adjustability needed to bite off huge chunks of burly trail action and epic cross country. - WEIGHT: 215g - DAMPING: External rebound, 3 position compression (Open/Pedal/Lock) - CONFIGURATIONS: 152x31mm, 165x38mm, 184x44mm, 190x51mm, 200x51mm, 200x57mm, 216x63mm - REBOUND DAMPING: Rapid Recovery - SPRING: Standard, High Volume, Standard with High Volume Eyelet, High Volume with High Volume Eyelet, DebonAir - SPRING ADJUST: Air pressure via single schrader valve - SHAFT MATERIAL: 7075 aluminum - SHAFT DIAMETER: 10mm - BODY MATERIAL: Hard anodized, forged aluminum with sag gradients - BODY FINISH: Fast Black - UPGRADE: over RL: 3 position floodgate lever - OPTIONS: Also available in 197x48mm and 197x51mm with AutoSag and Specialized mount, 184x48mm and 197x57mm DebonAir with Trek mount - OTHER: Weight based on 165x38mm, standard air can, no hardware
$1,239.99 - $1,241.00
The Pike Ultimate is a true trail machine we couldn't wait to have on our bikes and get to you. Featuring the new Charger 2.1 damper for unmatched trail control for every sweeping corner or loamy drop in. New ultra-low friction SKF wiper seals and Maxima Plush damping fluid all work overtime to reduce friction, silence noise, and provide lasting fork performance. - Completely re-designed to reduce hand fatigue and fight unwanted friction, the new Charger 2.1 damper increases confidence and control over every trail - Charger 2.1 RC2 damper option featuring independent high and low-speed compression adjust - Charger 2.1 RCT3 damper option featuring 3-position compression adjust (open/pedal/firm) with low-speed compression adjust - New ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - New Maxima Plush damping fluid reduces friction and silences damper noise - New Gloss Silver Signature color option - New foil graphics - Highly tunable DebonAir spring offers a coil-like consistent feel throughout the travel
$45.00 - $48.00
To tailor rear suspension behavior to your liking, start with the spring. RockShox's Vivid/Kage Coil Spring is made of steel and includes the retainer.
$19.99 - $24.99
- Clamps on to dual-Crown fork stanchions to prevent damage to frame - Easy to install and adjust, More secure and lower profile than stock bumpers - Molded loops allow clean and easy zip-Tie number plate mounting - Available for 35mm boxxer or 40mm fox stanchions, Sold in pairs
Fox Float Fluid 8oz bottle, part number 025-03-003-A. SHIPPING RESTRICTION This item is classified "ORM-D" and cannot be shipped via air. It can only be shipped via ground shipping methods. If you add this item to your cart, the list of available shipping methods will be reduced. For more variety of shipping options, consider removing this item from your cart (or placing a separate order using a ground shipping method.)
Crush washer (sold individually) Manufacturer Part Number: 241-01-002-C
The Fox 34/36/40 Crush Washer seals the fork lowers and prevents oil from seeping out while simultaneously keeping dirt out. It’s designed to fit Fox 34/36/40 mm stanchion forks and sits on the damper side shaft which extends out from the bottom of the forks. SPECS Compatible with the damper side of 34/36/40 mm fox forks Made from Nylon 13mm x 15mm (inner x outer) diameter Fox part # 241-01-011
$2.00 - $3.50
Changing the volume spacers in your fork is an easy internal adjustment that allows you to change the amount of mid-stroke and bottom out resistance. With this you can dial in your Fox Float fork's air volume to suit your riding style. FOX SHOX PART NUMBERS 234-04-811: Volume Spacer, Float NA 2, 32mm 8cc Blue 234-04-953: Volume Spacer, Float NA 2, 34mm 10cc Green 234-04-736: Volume Spacer, Float NA 2, 36mm 10cc Orange 234-04-628: Volume Spacer, Float NA, 36mm 7.6cc Blue 234-04-722: Volume Spacer, Float NA, 36mm 10.8cc Orange 234-04-726: Volume Spacer, Float NA 2, 40mm 10cc Red
FOX Float Fluid is the perfect Anti-Friction lube to use while performing Air Sleeve Maintenance Services on ALL FOX rear bicycle shocks. Small 5cc pack is the perfect amount for Fox rear shock services.
$33.00 - $46.00
If you want the best, go straight to the source. These are Fox's new Low Friction seal kits — the same seals used on their premium line of "Factory Series" forks. Great hop-up for your older Fox fork, essential for your newer Fox Fork Inspect and clean and/or change every 125 hours of riding use or anually for maximum performance and fork longevity. Select the kit that matches the stanchion tube size of your Fox fork Note* - Seals do not work on older forks with "flanged" style lowers and proper seal driver tool is necessary for proper installation.
$10.00 - $44.00
Fox Suspension Fluid is 5wt, 10wt, 20wt and fully synthetic. Green: Used as a bath oil in all Fox Shox forks. It is also the damper oil you will need for all open bath cartridges. Red: Used solely in the older sealed cartridge forks. Gold: Is intended for 'Fit Damper' forks. 5wt Teflon Infused: Grip and Grip2 Damper-Side Bath.
Tune in your Ohlins-equipped Demo for the best ride possible. - Ultra-fine spring rates to ensure perfect set up for all weights - Spring rates are broken down to 4 N/mm (23 lbs/in) - Only fits Ohlins TTX shock absorber
The Ohlins SJ FSR Shock Absorber for 650b/29 provides the ultimate in low hysteresis damping performance for enduro riding & racing, whether it's in straight line or side load scenario, The Shock Absorber also features a three-way external adjust for high- and low-speed compression, as well as rebound, for total fine-tuning capability. The adjustment ranges are intuitive as well, with external adjustments for high-speed compression, low-speed compression, and rebound damping. Spring rates are also highly adjustable for all weights, effectively rounding out the shock as the complete enduro package. - It's the original gold standard for moto, and now, it's the gold standard for trail riding. - Upper eyelet pin reducer hardware specific for the MY16-18 SJ FSR. - Internal bladder features a motocross-inspired design, plucked ripe from the MX legends at Ohlins. - Ultra-fine spring rates ensure the perfect spring rate across all weights. This guarantees optimal performance for any setup. *Please note that springs are sold separately. - Designed for external adjustments for high- and low-speed compression, as well as rebound damping. - Compatible with Stumpjumper FSR and Rhyme FSR 650b and 29 (model year 2016-2018). - Uses specific Ohlins ultra lightweight steel springs. *Please note that springs are sold separately.
Sure, there are plenty of lightweight XC forks out there, but racing demands so much more. Nimble handling, gram-obsessed weight, buttery damping — combined they all make the difference between a good fork and a great fork. And with this in mind, the all-new RockShox SID World Cup Brain fork has been completely redesigned to meet the demands of XC racing, and hyperbole aside, we can confidently say that it sets the bar for race-worthy performance. The new SID has many new features, but the main attraction is its use of our proprietary Brain technology. Made famous on the rear of our Worlds-winning Epic, the Brain system knows the difference between rider and terrain inputs — staying firm in hard accelerations on smooth ground, and effectively soaking up imperfections when the trail decides to fight back. This translates to the highest efficiency possible when hammering up climbs, and smooth compression on the descents — all without ever having to flick a switch. The World Cup Brain edition of the SID is not just a slight upgrade over the RLC and XX models. Along with the integrated Brain technology, it utilizes a carbon fiber steerer and crown, which reduce weight by over 100 grams and increases the overall stiffness. Also adding to the stiffness of is the short-travel-specific design. Leaving the 120-millimeter segment to the trail category, RockShox’s engineers were able to focus on the 80- to 100-millimeter travel range, and therefore develop lighter and stiffer uppers and air shafts. This new design, along with SRAM's Torque Caps (they create an enhanced interface between the hub and fork dropout), Power Bulge technology that reinforces the lowers, and 110-millimeter Boost spacing, keeps torsional stiffness high, allowing you to point-and-shoot while descending. Last, but certainly not least, on the feature spec is the Solo Air spring that’s customizable with RockShox’s Bottomless Tokens. The Solo Air spring lets you adjust pressure with a single Schrader valve that controls the pressure in both the positive and negative air chambers, making adjustments to pressure simple and intuitive. To customize ramp-up preference, RockShox’s Bottomless Tokens can be added to create a suspension curve that’s custom to your preferences. - Tapered, full-carbon crown, and steertube, for optimized stiffness, steering precision, and light weight. - 110mm hub spacing, Power Bulge technology, and Torque Cap compatibility provides un-rivaled stiffness for an XC fork. - Top adjust Brain damper for on-the-fly Brain fade tuning. - RockShox Solo Air spring and Bottomless Tokens make setup easy and customizable. - Designed specifically around 100mm of travel for an optimal combination of weight savings and stiffness. - 29" wheel only - 51mm offset
When Specialized teamed up with Öhlins, they created the benchmark in DH shock technology. The TTX sets the gold standard for mountain bike performance. It uses a motocross-inspired internal bladder damper for the ultimate in small bump compliance and big hit capability. It's infinitely tuneable thanks to high- and low-speed compression, as well as rebound damping controls. And, ultra-precise spring rates ensure proper setup for a huge range of rider weights (springs sold separately). • Custom length for Demo (2011-2014)
Tune in your Öhlins-equipped Enduro for the best ride possible. - Ultra-fine spring rates to ensure perfect set up for all weights - Spring rates are broken down to 4 N/mm (23 lbs/in) - Only fits Öhlins TTX shock absorber
RockShox's 30 Gold w/PopLoc remote fork provides the goods to ride harder, and go faster. High end features like lightweight magnesium lowers, 30mm stanchions, along with RockShox's Solo Air spring, and a TurnKey lockout w/PopLoc remote deliver comfort and control. RockShox's Power Bulge technology beefs up the lowers so you can dismantle technical trails with point and shred precision. Top all that off with an aluminum crown and steerer, and you have gold level performance without the gold level price.
$600.00 - $641.00
With bigger bikes there comes bigger demands. Thankfully, we created the 35 Gold to meet all of them, both in performance and value. Whether you have an E-MTB or MTB, the burly 35 Gold checks the box with our proven DebonAir spring and Motion Control damping. And new this year is an E-MTB-focused option with mounting points for optional full or short fenders. All told, you might wonder how we packed so much quality and performance into such a wallet-friendly package. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (1.8" taper available) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Highly tunable DebonAir spring offers a consistent feel throughout the travel - Fits Tires up to 2.8" (without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 35mm aluminum upper tubes couple stiffness and lightweight with a premium look - Offset: 44mm
Whether on snow or dirt, the Bluto is here to amplify your fat bike adventures. Every single part has been engineered specifically for fat bikes and is paired with RockShox quality and ride performance, even at the lowest of temperatures. Features - New graphics package for a fresh, premium look - Proven Motion Control damper featuring low-speed compression adjust to lockout with external rebound adjust - Engineered specifically for fat bikes with its crown, arch, and axle optimized to tackle the increased torsional loads of its wide stance - Seals and grease rated for low temperatures maintaining consistent performance in all conditions - Lightweight design weighing only 1800g - Offset: 51mm
Page 1 of 4 Next page