Your Search: "slayer"

Frame Protection Kit for the: - Slayer 2020-2021

Bearing kit for : - Slayer 2020-2021

RIDE-4 Chips for the - Slayer (2020-2021)

Bolt kit for 2020 Slayer: - Slayer 27.5" & 29" 2020-2021

Bearing kit for : Slayer 2017-2019

Big hits. Steep descents. Endless laps. Slay’em all. Smash every trail in total confidence. The Slayer was right there at the start of freeride movement, and that "heritage-of-send" lives on. Longer and slacker than ever, expect villainous levels of confidence when ripping big mountain trails or devouring the park. Rip, send, smash, repeat. Nothing's in your way. What sets the Slayer apart. Poised to rip demanding terrain - Aggressive geometry coupled with our RIDE-4 adjustability makes short work of any and every trail. Rip and tear everything from Rampage lines to Whistler’s famous A-line—the Slayer cannot be stopped. Villainous levels of traction and control - The Slayer’s is engineered around large volume air shocks and coil shocks. The result is a rate curve with a buttery, supple initial feel. Then, expect monstrously-competent levels of increasing support throughout travel. Built to slay indefinitely - The Slayer is built to annihilate park laps over, and over, and over again. Equip it with a large single crown or dual crown forks—your weapon, your choice. It’s burly, versatile, and engineered to survive anything you throw at it. - DH park worthy strong and stiff frame - Pedaling performance of a trail bike - Smoothwall Carbon front triangle - Fully guided internal housing - Fully shielded bearings

Smash every trail in total confidence. The Slayer was right there at the start of freeride movement, and that "heritage-of-send" lives on. Longer and slacker than ever, expect villainous levels of confidence when ripping big mountain trails or devouring the park. Rip, send, smash, repeat. Nothing's in your way. - DH park worthy strong and stiff frame - Pedaling performance of a trail bike - Next generation FORM Alloy frameset - Fully shielded bearings Wheel size: - Sizes Small – Medium: 27.5-inch - Sizes Medium – X-Large: 29-inch

Bottom Bracket Cable Port kit for the: - Slayer 27.5" and 29" 2020-2021

It’s time to go big. The classic spirit of the west lives in all of us. Renegades. Champions of freedom and exploration. Living by our own set of rules. Introducing the new Slayer, an outlaw built to stand out from the herd and stand up to any trail. The Slayer was right there at the start of the freeride movement, and that “heritageof-send” lives on. Longer and slacker than ever, and now available in a mixed-wheel setup, expect villainous levels of confidence when ripping big mountain trails or devouring the park. Designed to shred hard The Slayer’s reinforced frame means it’s bike park tough and ready for big mountain charging, available in both SMOOTHWALL™ carbon and FORM™ Alloy. Wheel size compatibility All frame sizes are full 29" and MX (29" front / 27.5" rear) wheel compatible. Storage included Carbon models now come with our new PenaltyBox™ downtube storage, including a custom storage solution for both a tube and tools. Fully enclosed internal routing Allows for easy cable and hose installations, with thoughtful consideration for moto-style brake setups. RIDE-4™ adjustment system Allows riders to quickly fine-tune their geometry and suspension with a single Allen key. Shielded bearings Help prevent contamination from gnarly trail conditions or post-ride wash stations. Water bottle compatibility All frame sizes are water bottle compatible.

Smash every trail in total confidence. The Slayer was right there at the start of freeride movement, and that "heritage-of-send" lives on. Longer and slacker than ever, expect villainous levels of confidence when ripping big mountain trails or devouring the park. Rip, send, smash, repeat. Nothing's in your way. - DH park worthy strong and stiff frame - Pedaling performance of a trail bike - Next generation FORM Alloy frameset - Fully shielded bearings Wheel size: - Sizes Small – Medium: 27.5-inch - Sizes Medium – X-Large: 29-inch

It’s time to go big.Smash every trail in total confidence. The Slayer was right there at the start of freeride movement, and that “heritage-of-send” lives on. Longer and slacker than ever, expect villainous levels of confidence when ripping big mountain trails or devouring the park. Rip, send, smash, repeat. Nothing’s in your way. The classic spirit of the west lives in all of us. Renegades. Champions of freedom and exploration. Living by our own set of rules. Introducing the new Slayer, an outlaw built to stand out from the herd and stand up to any trail. Designed to shred hard The Slayer’s reinforced frame means it’s bike park tough and ready for big mountain charging, available in both SMOOTHWALL™ carbon and FORM™ Alloy. Wheel size compatibility All frame sizes are full 29" and MX (29" front / 27.5" rear) wheel compatible. Fully enclosed internal routing Allows for easy cable and hose installations, with thoughtful consideration for moto-style brake setups. RIDE-4™ adjustment system Allows riders to quickly fine-tune their geometry and suspension with a single Allen key. Shielded bearings Help prevent contamination from gnarly trail conditions or post-ride wash stations. Water bottle compatibility All frame sizes are water bottle compatible.

It’s time to go big.Smash every trail in total confidence. The Slayer was right there at the start of freeride movement, and that “heritage-of-send” lives on. Longer and slacker than ever, expect villainous levels of confidence when ripping big mountain trails or devouring the park. Rip, send, smash, repeat. Nothing’s in your way. The classic spirit of the west lives in all of us. Renegades. Champions of freedom and exploration. Living by our own set of rules. Introducing the new Slayer, an outlaw built to stand out from the herd and stand up to any trail. Designed to shred hard The Slayer’s reinforced frame means it’s bike park tough and ready for big mountain charging, available in both SMOOTHWALL™ carbon and FORM™ Alloy. Wheel size compatibility All frame sizes are full 29" and MX (29" front / 27.5" rear) wheel compatible. Fully enclosed internal routing Allows for easy cable and hose installations, with thoughtful consideration for moto-style brake setups. RIDE-4™ adjustment system Allows riders to quickly fine-tune their geometry and suspension with a single Allen key. Shielded bearings Help prevent contamination from gnarly trail conditions or post-ride wash stations. Water bottle compatibility All frame sizes are water bottle compatible.

It’s time to go big.Smash every trail in total confidence. The Slayer was right there at the start of freeride movement, and that “heritage-of-send” lives on. Longer and slacker than ever, expect villainous levels of confidence when ripping big mountain trails or devouring the park. Rip, send, smash, repeat. Nothing’s in your way. The classic spirit of the west lives in all of us. Renegades. Champions of freedom and exploration. Living by our own set of rules. Introducing the new Slayer, an outlaw built to stand out from the herd and stand up to any trail. Designed to shred hard The Slayer’s reinforced frame means it’s bike park tough and ready for big mountain charging, available in both SMOOTHWALL™ carbon and FORM™ Alloy. Wheel size compatibility All frame sizes are full 29" and MX (29" front / 27.5" rear) wheel compatible. Fully enclosed internal routing Allows for easy cable and hose installations, with thoughtful consideration for moto-style brake setups. RIDE-4™ adjustment system Allows riders to quickly fine-tune their geometry and suspension with a single Allen key. Shielded bearings Help prevent contamination from gnarly trail conditions or post-ride wash stations. Water bottle compatibility All frame sizes are water bottle compatible.

We designed Copilot to be your go-to jacket when you need the peace of mind that comes with proper, seam-sealed weather protection, but don't have the space to stow anything extra. Thanks to the best-in-class breathability of GORE-TEX Paclite Plus with 100% recycled nylon face fabric, the Copilot excels at balancing your temperature, whether you're working hard on the climb or descending through the clouds. For the ultimate in wet-weather versatility, Copilot features an over-the-helmet hood, cinched via 3-way draw cords. A dropped hem, elasticated cuffs and reflective logos complete the jacket. Materials: - Body: GORE-TEX Paclite Plus 2L, 40d Recycled 100% nylon, Plain weave - Front zip: #3 Watertight Vislon Weight: - 224g Features: - Packs into its own side pocket with double-sided zipper - Watertight zippered side pocket - Over-the-helmet hood with 3-way draw cords - Elasticated cuffs - Drop back hem - Hem draw cord - 13mm taped seams - Reflective logos

A high-performance layer for training and racing in wintry conditions. Designed for high-tempo riding and racing when the temperature is close to freezing, the Women's Pro Team Thermal Base Layer takes the Classic Deep Winter Base Layer as inspiration and adds a technical twist. This base layer is made from a polyester fabric that has a soft grid finish against the skin, engineered to trap air and keep your body warm without compromising the fabric's quick-drying and fast-wicking properties. This ensures that even when you sweat during hard efforts, moisture won't work against you on your cool down. The base layer has a tall snood which covers up to the mouth and ears when worn high, with a gap at the back for longer hair. - Made of a warm, quick-drying polyester fabric - Two fabric weights, with thicker insulation across chest and arms for added warmth - Tall collar covers mouth and ears when worn high - Same 'Race' cut as other Women's Pro Team base layers—for a low on-bike position Front - 84% Polyester / 16% Spandex Back - 91% Polyester / 9% Spandex

No more relying on a buddy to carry your spare tube and tools. This Mütherload™ Strap from Backcountry Research quickly and easily mounts anywhere on your frame.

For technical clothing designed to be next to skin, seamless construction reduces edges and stitches on your body that could be sources of irritation and inconsistent stretch. Using special cylindrical knitting machines, we engineer areas of stretch, compression, open mesh, or closed areas for the ideal composition. Our seamless base layer is designed to be worn year-round, under jerseys or outerwear, to accelerate moisture away from the body, keeping you cool in the summer and dry in the winter. Compressive, articulated, form fit. - Synthetic yarns are blended to have a soft feel and to move moisture away from the skin, while also retaining a compressive feel. - Targeted stretch and support are built-in, so the base layer will hold and move with the body throughout the movements of cycling. - Seamless construction ensures the closest possible fit for maximum moisture management, while the elimination of seams also guarantees that chafing will be a non-issue. - Form-Fit closely and precisely conforms to the curves of the body, ensuring an unrivaled level of fit.

COMPATIBILITY - Altitude Powerplay Alloy 2019 - Altitude Powerplay Alloy 2020 - Altitude Powerplay Alloy 2021 - Altitude Powerplay Carbon 2018 - Altitude Powerplay Carbon 2019 - Altitude Powerplay Carbon 2020 - Altitude Powerplay Carbon 2021 - Growler Powerplay Alloy 2019 - Growler Powerplay Alloy 2020 - Growler Powerplay Alloy 2021 - Growler Powerplay Alloy 2022 - Instinct BC Powerplay Alloy 2020 - Instinct BC Powerplay Alloy 2021 - Instinct BC Powerplay Carbon 2021 - Instinct Powerplay Alloy 2019 - Instinct Powerplay Alloy 2020 - Instinct Powerplay Alloy 2021 - Instinct Powerplay Carbon 2020 - Instinct Powerplay Carbon 2021

Our tried and tested product has had a face lift! Velocity Hucking Systems 2.0 now will now comfortably fit any and all chain stays. Features: - New 70mm wide base that will now wrap around your -chainstay for added protection and sound damping - Malleable silicone rubber that will easily mold to the shape of your frame. - UV resistant - Quieter, the new update to our design have now made our air bubbles softer without compromise to durability - Dimensions (L x W x H): 350 x 70 x 10 mm

Carbon Headset Spacers

Pulling on an extra layer when the mercury's rising might seem counterintuitive, but a proper base layer, like the Seamless Light Base Layer, can make all the difference. Wearing a lightweight base layer helps wick sweat away from the body, generating an even greater cooling effect. To top it off, features like soft-puff stitching eliminate abrasion-inducing seams, while our Slim Fit conforms to your body. - Synthetic yarns have a soft feel and move moisture away from the skin while providing the perfect amount of compression. - Targeted stretch and support areas move with your body while you're riding. - Seamless construction provides the best fit and eliminates chafing. - Fabric Content: 84% Polypropylene, 8% Polyamide, 8% Polyester

An exceptionally lightweight and breathable layer that sits close to the skin, wicking sweat away from the body to aid temperature regulation. A quality base layer works hard to keep sweat away from the skin, improving temperature regulation and reducing discomfort. Pro Team Base Layers have been updated this year with a new fabric that is lighter, more breathable, and has improved stretch. Low-profile seams—both flatlock and bonded—are used throughout to reduce irritation, and the fabric's improved stretch makes for an improved fit. Anti-bacterial and wicking treatments are applied to the fabric to keep it feeling fresh even on long rides. - Lightweight and breathable fabric - Bonded seams at the shoulders and yoke - Race-ready fit sits close to the skin - Printed with phrases from road racing's history - Anti-bacterial and wicking treatments applied to the fabric - Stretch side panels ensure a close fit

Make any hour happy hour by turning your Rambler Drinkware into a cocktail shaker with a leak-resistant shaker lid that’s as durable as it is portable. It’s made with stainless steel, features double-wall insulation, and No Sweat™ Design so your drinks are consistent and cold from the first pour to the last. Compatible with Rambler®295 ml Lowball Rambler® 295 ml Stackable Mug, Rambler® 473 ml Stackable Pint, Rambler® 710 ml Mug, Rambler® 739 ml Straw Mug and Rambler® 591 ml Tumbler. A lid that takes the bar where you are. Compatible with 591 ml Tumbler, 473 ml Pint and 295 ml Lowball Easy press lid and twist cap Leak resistant Dishwasher safe

- Includes: 2x2.5mm, 1x5mm, 1x10mm.

Pulling on an extra layer when the mercury's rising might seem counterintuitive, but a proper base layer, like the Seamless Light Base Layer, can make all the difference. Wearing a lightweight base layer helps wick sweat away from the body, generating an even greater cooling effect. To top it off, features like soft-puff stitching eliminate abrasion-inducing seams, while our Slim Fit conforms to your body. - Synthetic yarns have a soft feel and move moisture away from the skin while providing the perfect amount of compression. - Targeted stretch and support areas move with your body while you're riding. - Seamless construction provides the best fit and eliminates chafing. - Fabric Content: 84% Polypropylene, 8% Polyamide, 8% Polyester

Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10

The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.

• Supplied as set of 4 pcs (1x3mm, 1x5mm, 1x10mm and 1x20mm) • Color: UD Carbon • Weight: 12g

Offering high-performance warmth in the coldest weather, the Pro Team Thermal Base Layer is perfect for fast-paced training and racing in wintry conditions. Designed for high-tempo riding and racing when the temperature is hovering around, or below freezing, the Pro Team Thermal Base Layer takes the Deep Winter Base Layer as its inspiration and adds a Pro Team technical twist. This base layer is made from a polyester fabric that has a slightly bobbled finish against the skin, engineered to trap air and keep your body warm without compromising the fabric's quick-drying and fast-wicking properties. This ensures that even when you sweat during hard efforts, moisture won't work against you on your cool down. Reflective bars printed on the neck provide visibility under dark skies and the base layer has a tall snood that covers up to the mouth and ears when worn high. As with all Pro Team products, the base layer is cut for a low on-the-bike position—ready for you to drop the hammer, all winter. - Made of a warm, quick-drying polyester fabric - Two fabric weights, with thicker insulation across chest and arms for added warmth - Tall collar covers mouth and ears when worn high - Same ‘Race' cut as other Pro Team base layers—for a low on-bike position - Front: 84% Polyester / 16% Spandex - Back: 91% Polyester / 9% Spandex

Race Face Cinch bottom bracket spacer kit for BB30/PF30 bottom brackets.