Tubeless Kits & Parts
PROCORE is an inner high-pressure air chamber for tubeless systems that allows dual air pressures for traction and impact protection. Procore allows low pressures (down to 14psi) to be run in tubeless tires, with a high-pressure inner chamber that locks the bead in place and prevents burping and rim dents from impacts. - Sold as a set with all components to set up a wheelset on one bike (tires not included) - Minimum internal rim width is 23mm - Maximum distance from rim well to rim inner surface is 20mm - Minimum tire pressure with ProCore is 14 psi
PROCORE is an inner high-pressure air chamber for tubeless systems that allows dual air pressures for traction and impact protection. Procore allows low pressures (down to 14psi) to be run in tubeless tires, with a high-pressure inner chamber that locks the bead in place and prevents burping and rim dents from impacts. - Sold as a set with all components to set up a wheelset on one bike (tires not included) - Minimum internal rim width is 23mm - Maximum distance from rim well to rim inner surface is 20mm - Minimum tire pressure with ProCore is 14psi
$14.49 - $214.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable
$120.00 $149.99 20% Off
Grip Studs® bicycle tire studs are up to the task of managing even the iciest terrain. This capable tire stud with its solid tungsten carbide shaft prevents spinning out on ice and snow all season long. Its unique wide–auger design installs easily with a cordless drill without tedious gluing or complicated techniques, and it stays put like no other screw–in stud. Grip Studs® shallow auger depths work in most off road tires and are easily removed at season’s end if desired. •Easy-to-install Grip Studs® for tires, tracks and soles. •Durable Tungsten Carbide performance tip and core. •Wide-auger threads hold tire studs in place; Grip Studs® won't back out. •Notched for easy installation and removal. •Wide selection of sizes to fit most tires and soles. •Installation and removal tools for use in power drills.
$98.99 - $110.99
Orange Seal’s comprehensive Tubeless Conversion Kit w/ SubZero Sealant includes everything that you need to convert your wheels to a tubeless system. Kit includes rim tape, two removable valve core (RVC) valve stems and one 8 ounce bottle of Sub-Zero sealant.
$69.99 - $95.99
Tyreinvader is an anti-pinch-flat insert for tubeless tires. Very simple to use and light, it saves your tires and rims from hard impacts without interfering with the way your wheels behave. - Very light weight and high durability - Premium material (high density EVA) absorbs shocks but not sealant - Can be easily adapted to common wheel diameters - No need for specific tubeless valves Size: - 35: Rim external width 18-25mm - 40: Rim external width 20-25mm - 50: Rim external width 22-28mm - 55: Rim external width 27-35mm - 60: Rim external width 34-50mm
This is Continental's glue for gluing tubular ("sew-up") tires on aluminum tubular rims. The container has a brush built into the screw-on cap for easy glue application. You get enough glue to install about 12 tires.
$23.99 - $69.99
Get unbelievable traction in even the slickest winter conditions by adding Bontrager Tire Studs to your stud-ready winter tires. The carbide tipped design provides biting traction with an easy to install, durable design. Key features - Carbide-tipped design provides long lasting and durable traction - Compatible with Bontrager stud-ready tires - Use Bontrager Tire Stud Tool for easy installation
$62.00 - $64.00
Zipp is proud to partner with Silca to offer a premium valve extender with a stylish innovative design that eliminates annoying rattle between the extender and rim valve hole. - 24mm extender gasket removes rattle - Machined 6066-T6 aluminum - When installed on Zipp butyl tubes with 37mm valves, compatible with Zipp 303, 404 and 808 rims. - Compatible with all tubes with removable valve core. Places Presta valve at top of extender for easy access for inflation. - 34mm for 32-49mm rim depth including Zipp 303 – 2g - 45mm for 50-65mm rim depth including Zipp 404 – 2.7g - 60mm for 66-80mm rim depth including Zipp 808 – 3.7g - 75mm for 81-95mm rim depth – 4.7g - Kit includes two extenders for the bike, one extender for the spare tube. - (34mm kit includes one extender tool)
Geax's Pit Stop TNT sealant adds flat protection to your tires. It seals small punctures and prevents new ones.
The Next Level in Sealing Power from the People who Invented Tubeless Conversions If you've walked the mechanics' pits at any National or International level event, chances are you've seen them: trademark Stan's black quart bottles with no labels. Look closer and you might have seen strange symbols scrawled all over the bottles in a silver marker, letters and numbers, formula notes by the man himself, Stan Koziatek. For nearly fifteen years Stan has been quietly formulating a special racing version of our legendary sealant for many of cycling's most successful teams. Working with athletes who push themselves and their tubeless systems to the absolute limit, he developed a proprietary sealant formula with close to twice the amount of the standard sealing crystals plus special "XL" crystals capable of sealing even larger punctures. Stan's Race Sealant's combination of large and smaller sealing crystals interlock to form a lattice work that not only seals but strengthens and reinforces the area of the puncture, allowing for an entirely new level of sealing performance. The quantity and size of crystals in this special formula means that Stan's Race Sealant can only be installed directly into the tire. As a result of its immense sealing capabilities, the Race Sealant will clog injectors and smaller bottles almost immediately. Stan's has made Race Sealant available to riders everywhere, and it is only available by the quart. - First choice of riders around the world for tubeless conversion and flat prevention - Twice the amount of Stan's standard sealing crystals - "XL" crystals capable of sealing even larger punctures - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment
$46.99 - $53.99
Tannus Armour is the ultimate in tire protection and performance for all levels and styles of riding. Sitting between your tire and inner tube, the Tannus Armour provides 15mm of puncture protection on the top, as well as 2mm of sidewall protection from sharp objects and rocks. Whether you are a city biker, adventure tourer or prefer the off-road, downhill or gravel trails, Tannus Armour gives you increased grip and vibration dampening for a smoother, more comfortable and enjoyable ride. - Patented Aither Technology; Aither is a multi-cell foam compound that forms the structure of the Armour
Use Enve's Mountain Bike Tubeless Kit on your Enve mountain bike rims to reduce weight and improve traction. When used in combination with tubeless-compatible tires and sealant (sold separately), the kit lets you run lower tire pressure to maximize grip and control, whether you're going up a steep and shattered climb or around a tight, off-camber switchback. The kit includes two valve stems and tape.
$13.99 - $49.99
A new standard in tubeless sealant. Finish Line Tubeless Tire Sealant, featuring Fiberlink technology, will not cure inside the tires and doesn’t need to be refreshed every few months to maintain effectiveness. This sealant will last the entire usable life of the tire. Since there is no liquid latex or ammonia in Finish Line sealant, it is naturally non-toxic, hypoallergenic and safe for carbon fiber rims. Additionally, Finish Line Tubeless Tire Sealant cleans up easily with water – no more scrubbing or scraping cured latex from tires and rims. Fiberlink technology makes this possible. Utilizing DuPont Kevlar fibers, Fiberlink seals are extremely robust once they plug a hole. When a puncture happens, fibers rush into the wound and quickly stop air loss. As the tire flexes while it is ridden, the Fiberlink mesh tightens and reinforces itself, creating a confidence-inspiring seal that will last ride-after-ride. - Non-latex ammonia-free formulation - Kevlar reinforced Fiberlink mesh seal - Seals up to 1/4" punctures - Can be used in extreme temperatures, down to -10 degrees Fahrenheit
• Synthetic elastomer gasket with 2X the holding power and 5X wear resistance of traditional gasket materials • Two stage seal design, improves sealing and stability on all presta valve stems • Adjustable compression, user can tighten the cap to increase holding power by 4X and compensate for wear •15 degree stem angle reduces stress on the valve stem from pump hose • 12.0g
$39.99 - $41.49
- 6061 Aluminum valve and cap - Removable valve core - 4mm allen key slot for easy installation and removal - Comes with round & square rubber bases for different rim types - Spare alloy valve cap with integrated valve core removal tool
$15.00 - $40.00
Our new 2Bliss Ready Tire Sealant was custom-designed in partnership with a leading laboratory for tire sealants, and it also underwent extensive real-world testing with our Factory Athletes. What we developed is an innovative, ecological formulation that's the answer to the requirements that riders like you've been demanding. It will immediately seal punctures up to 6mm, whether it be on a road or mountain tire, as well as across global temperatures [-20° to 70°C]. Natural, micro holes in the sidewalls will seal well, and the system is safe for use with latex inner tubes, even inside tubulars. Please note that this sealant is ammonium-, protein-, and latex-free, so it holds no potential for allergic reactions, and there's no risk of it creating damage to bike parts. - Proven by our Factory Team Athletes. - Seals punctures up to 6mm. - Performs in a wide temperature range (-20° – 70°C). - Works in latex inner tubes inside tubulars. - Ammonium-, protein-, and latex-free, so there's no risk of allergic reactions or damage to bike parts. Recommended sealant amount per tire: - Road: 24-32mm - 30-40ml - Open Road: 33-50mm - 50-70ml - MTN: 2.0-2.3” 80-100ml - MTN: 2.4-3.0” 100-125ml
$5.99 - $39.99
The Product that Started a Tubeless Revolution Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. Seals punctures up to 1/4-inch (6.5mm) quickly Stays liquid 2-7 months for long-lasting protection Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) Natural materials, safe for the environment Can be injected through valve stems with removable cores compatible with tubes and tubular tires
If you've heard the expression "to Stan's a tire," it's referring to Stan's Tire Sealant. Put the recommended amount in your road, mountain and cyclocross tires and it will stop slow leaks and seal small punctures. Rim strips and valves not included.
$6.49 - $39.49
Bontrager's latest TLR sealant seals faster, lasts longer, and provides better air retention so you have a better tubeless experience with easier setup. The ammonia-free formula won't corrode rims or degrade tire rubber, and it provides permanent repair for punctures up to 6.5mm. Product details - Improved flat protection seals punctures faster - Increased air retention holds air longer with 3x less air loss than the original - Compatible with all TLR tires for use on road, gravel, and mountain bikes - Ammonia-free mixture won't corrode alloy rims or degrade tires - Effective in temperatures ranging from -5 to 120 degrees F (-21 to 49 degrees C) - Cool new blue color - Use with Bontrager TLR wheels, sealant, and rim strips for a complete tubeless system designed and tested to work together - Can be used in tubes to help seal punctures
$33.99 - $36.99
For use with deep section aero rims. Available in either 58mm or 78mm lengths.
Vittoria's Mastik'One is a professional-grade tubular cement that has been trusted by the pros for decades. It provides excellent hold on both aluminum and carbon rims, and gives you the piece of mind that comes with knowing you're riding on the best. - Choose from 250-gram tin or 30-gram 12-pack - 30 grams is enough for one to two tires depending on surface area
Subzero tire sealant is formulated to maximize extreme frigid temperature; enabling riders in the far North to ride with flat protection all while offering the same quick sealing properties you’ve come to expect.
Lightweight 6061 alloy. - Provides up to an additional 117mm of extension - 1 1/8" - 223g
Geax's Pit Stop TNT sealant adds flat protection to your tires. It seals small punctures and prevents new ones.
MOUNTAIN RESCUE. The Clutch Bar End Storage is a cleverly stashed, simple-to use tubeless tire repair kit, that includes one tire plug tool and five spare tire plugs. The Clutch Bar End kit fits with virtually all aluminum and carbon handlebars without adding significant weight. FEATURES Quickly and easily mounts inside the handlebar Compatible with virtually all aluminum & carbon fiber handlebars Includes tire plug tool 5 spare tire plugs SPECIFICATIONS Tools: Tire plug tool, spare tire plug x10 System: Compatible most common MTB handlebars Sizes: 100 x 28 x 14mm Colors: Matte Black Weight: 34g Material: High density plastic
$24.99 - $34.99
From pro-level race bikes to sport, fitness and adventure bikes, Giant delivers the benefits of tubeless tire technology to riders of all types. Features - Upgrade to tubeless performance - Specially formulated adhesive backing to manage heat generated from rim brakes - Lighter than most standard rim tapes and rim bands; weighs only 5g per wheel - Fits tubeless compatible on and off-road wheels with 19-35mm inner rim widths - One roll can tape up to one 29er wheelset
$27.99 - $34.99
• Repairs large punctures and slices • Reacts with Stan’s sealant to form an instant, airtight seal • Barbed plastic tip anchors into tire and will not pull out when riding • Flexible material and laser-cut shape conforms to puncture and bonds with sealant • Wears off clean, no trimming needed, and can not be felt while riding, even on road tires • Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover • Includes two pre-loaded DARTs for sealing multiple and larger punctures • Clear caps keep DARTs clean and unthread quickly for fast deployment • Simple and easy to refill
Compact tubeless tire repair kit with machined aluminum storage tube that doubles as a handle. Combined tire reamer and insertion tool. Includes five tire plugs. - Weight: 47g
$12.59 - $30.99
Continental's Revo Sealant is specifically designed for use with their Revolution tubeless-ready tires and it's great for tubular tires, too. It seals punctures and contains no protein or ammonia so it's safe for use in all wheels, too.
Page 1 of 3 Next page