Fox Racing Shox Components

COIL PERFORMANCE FOR THE TRAIL AND BEYOND Answering the prayers of riders seeking the ultimate in plush suspension, the new DHX brings coil-sprung, magic-carpet, trail-smoothing performance in a wide range of configurations to the trails and beyond. ADJUSTMENTS - Independent 2 Position Open/Firm Lever - Low Speed Rebound – 16 Clicks - Low Speed Compression – 11 Clicks - Coil spring preload - (new detents on spring collar) SPECS & FAMILY FEATURES - ALL-NEW chassis and damper - High-flow main piston - Numbered Tool-free 12 position single-turn LSC (Low Speed Compression) adjuster - Independent firm mode circuit – 2 position adjuster - Optimized reservoir lengths per shock size - Hydraulic top out feature - Reduced damper noise - MCU bottom out bumper - Single-turn rebound adjuster with a variety of access modes (Tool-free, 3mm hex (direct access), 2mm hex or similar (side access) - Spring preload collar with detents and max / min number of clicks and direction arrow - Full diameter spring retainer with wire ring (like DHX2) - Spring scuff guard on body (like DHX2) ALL FACTORY DHX SHOCKS - Shaft Coating Chromoly - Ultra-low friction, highly durable damper shaft finish - VVC Rebound Yes - Detents on spring collar Yes

READY TO RACE STRAIGHT OUT OF THE GATE Featuring an entirely new chassis and damper, delivering enhanced tunability, smoother performance, and more progressivity than ever before. DOES NOT INCLUDE SPRING ADJUSTMENTS - Optional 2-position Open/Firm lever (retains high and low speed compression adjustment) - High-speed compression - 8 clicks - Low-speed compression - 16 clicks - High-speed rebound (w/VVC) - 8 clicks - Low-speed rebound - 16 clicks - Coil spring preload - (new detents on spring collar) SPECS & FAMILY FEATURES - NEW chassis & damper - NEW detents on spring collar to prevent loosening under light preload conditions - NEW high-flow main piston - NEW MCU bumper for increased end stroke progression and bottom out control - NEW ultra-low friction, highly durable hard chrome damper shaft finish - NEW improved high-speed rebound tunability via the addition of VVC (Variable Valve Control) - NEW improved bearing ratio for metric sizes - NEW graphics - Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks - Increased control and decreased harshness via linear damping - Steel outer body and finned inner body for improved structural rigidity and reduced hysteresis - Independent firm mode circuit – firmer lockout than previous DHX2 - Reduced friction - Reduced length reservoir for a better fit on more frames

Fox Fork Mud Guard for 2021+ Single Crown Fox Forks Protect your bike and your face with Fox's new integrated fender. Compatible with 2021+ Fox 36 and 38 forks. Includes all installation hardware.

FOX is now offering decal kits in 11 custom colorways. Kits include fork and shock decals to fit almost every FOX fork and shock model. Specific decals for 32, 34, 36, 38 and 40 forks as well as DPS, FLOAT X, FLOAT X2, DHX and DHX2 shocks. One decal kit can cover more than one fork and shock combo. Images to be added later

It's a water bottle. - 650 ml Purist waterbottle - Soft LDPE body is easy to squeeze and BPA-free - Thin silicone coating prevents staining or tastes to keep your water pure and bottle clean. - High-flow Heart Valve is leakproof, even when the valve is open. - Fits most standard bottle cages.

Crush washer (sold individually) Manufacturer Part Number: 241-01-002-C

SUPER LIGHT DONE RIGHT Meet the new Transfer SL. At 128 grams (25%!) lighter than the regular Transfer post, it’s the lightest mainstream dropper post on the market. Period. With lever options for flat bars, drop bars, and 1x and 2x drivetrains it (finally) brings the word “shred” into the superlightweight XC and Gravel conversation. DOES NOT INCLUDE LEVER AND CABLEING ALL FACTORY TRANSFER SEAT POSTS - Routing: Internal Only - Lower Coating: Anodized Black - Upper Coating: Kashima Coat SPECS & FAMILY FEATURES - 128g lighter than 2021 Transfer - Lightweight under-bar 1x lever design or classic 2x lever - NEW 200mm drop option - Updated design Reduced overall length and insertion depth: - 27.2 x 50mm, 80mm min insertion, 248mm max insertion, 350mm extended length, Starting Weight: 327g - 27.2 x 70mm, 80mm min insertion, 248mm max insertion, 370mm extended length, Starting Weight: 338g - 30.9/31.6 x 75mm, 80mm min insertion, 225mm max insertion, 355mm extended length, Starting Weight: 342g/352g - 30.9/31.6 x 100mm, 80mm min insertion, 225mm max insertion, 380mm extended length, Starting Weight: 347g/359g - XL 31.6 x 100mm, 80mm min insertion, 275mm max insertion, 430mm extended length, Starting Weight: 399g

Replacement Air shaft Assembly for Changing the Travel within your fork This Assembly is for 2019 to 2021 Fox 34 Non-Stepcast forks in Factory, Performance - Elite

Saddle clamp hardware: Bolt & Barrel nut. Kit includes 2x Bolts 2x Barrel Nuts

The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper. - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Remote lever sold separately - 0mm offset

Need to replace or upgrade your Damper assembly. Our GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes our patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time consuming and complicated task of completely disassembling and reassembling the fork. ADJUSTMENTS High-speed compression (w/VVC) 8 clicks Low-speed compression 16 clicks High-speed rebound (w/VVC) 8 clicks Low-speed rebound 16 clicks

Replacement Quick Release Axle assembly, for Fox forks. Two options available 2016 15x100 QR 2016 15x110 QR

If you want the best, go straight to the source. These are Fox's new Low Friction seal kits — the same seals used on their premium line of "Factory Series" forks. Great hop-up for your older Fox fork, essential for your newer Fox Fork Inspect and clean and/or change every 125 hours of riding use or anually for maximum performance and fork longevity. Select the kit that matches the stanchion tube size of your Fox fork Note* - Seals do not work on older forks with "flanged" style lowers and a seal driver tool is necessary for proper installation.

SMOOTHER STIFFER AND MORE TUNABLE THAN EVER BEFORE With all-new design inside-and-out, plus an unmatched combination of smooth performance, tunability, stiffness, and lightweight–we took the award-winning, EWS favourite and made it even better. 36 FACTORY GRIP2 FORKS Upper Tube Finish: Kashima Coat Air Channels: Yes Bleeders: Yes Axle Size: 15QR x 110 Floating Axle: Yes Rotor Size: 180 direct Post Mount, Up to 230 compatible Mud Guard Mount: Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment Air Spring: FLOAT EVOL Steerer: 1.5 Taper Starting Weight: 1965 g

Suspension forks are expensive, so keeping them running smoothly is important. Not only will your fork perform better if you give it some love, but it'll also perform better for longer. These seal drivers help with the installation FOX dust wipers. Integrated guide helps ensure straight installation. Material: Delrin Size: 32, 34, 36, 40

Flush socket for no-slip installation and removal of fork top caps 3/8" Drive 6 point socket for use with ratchet wrench/torque wrench External knurling for better finger grip Material: 7000 series aluminum Anodized orange w/laser etched logo/size marking Common Uses: 32/34 Series: Fork Topcap Socket, 26mm, 3/8 Drive 34 Series: Fork Topcap Socket, 28mm, 3/8 Drive 36/40 Grip Damper: Fork Topcap Socket, 28mm, 3/8 Drive 36/40 Series: Fork Topcap Socket, 32mm, 3/8 Drive https://www.ridefox.com/fox17/help.php?m=bike&listall=service

Boasting a laundry list of advanced features, the FLOAT X2 is ready to clean house. ADJUSTMENTS - Optional 2-position Open/Firm lever (retains high and low speed compression adjustment) -High-speed compression - 8 clicks -Low-speed compression - 16 clicks -High-speed rebound (w/VVC) - 8 clicks -Low-speed rebound - 16 clicks - NEW chassis & damper - NEW high-flow main piston - NEW progressive bottom-out bumper - NEW lower friction air seals - NEW ultra-low friction, highly durable hard chrome damper shaft finish - NEW graphics - Improved bearing ratio for metric sizes - Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks - Updated compression ratios, 300psi max - Improved high-speed rebound tunability via addition of VVC (Variable Valve Control) I- ncreased control and decreased harshness via linear damping Ultra-low-friction, highly durable damper shaft finish - Independent firm mode circuit – firmer lockout than previous FLOAT X2 - Finned inner body for improved structural rigidity and reduced hysteresis

Boasting a laundry list of advanced features, the FLOAT X2 is ready to clean house. ADJUSTMENTS - Optional 2-position Open/Firm lever (retains high and low speed compression adjustment) -High-speed compression - 8 clicks -Low-speed compression - 16 clicks -High-speed rebound (w/VVC) - 8 clicks -Low-speed rebound - 16 clicks SPECS & FAMILY FEATURES - NEW chassis & damper - NEW high-flow main piston - NEW progressive bottom-out bumper - NEW lower friction air seals - NEW ultra-low friction, highly durable hard chrome damper shaft finish - NEW graphics - Improved bearing ratio for metric sizes - Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks - Updated compression ratios, 300psi max - Improved high-speed rebound tunability via addition of VVC (Variable Valve Control) I- ncreased control and decreased harshness via linear damping Ultra-low-friction, highly durable damper shaft finish - Independent firm mode circuit – firmer lockout than previous FLOAT X2 - Finned inner body for improved structural rigidity and reduced hysteresis These models not available with 2 position switch. TRUNNION | 225 x 75 STANDARD | 250 x 75 -

HEAVYWEIGHT FEATURES IN A LIGHTWEIGHT PACKAGE Designed specifically to meet the demands of aggressive trail riders, the new FLOAT X combines sophisticated damping and fade free performance with incredible light weight and outstanding structural integrity. ADJUSTMENTS - Independent 2 Position Open/Firm Lever - Low Speed Rebound – 16 Clicks - Low Speed Compression – 11 Clicks SPECS & FAMILY FEATURES - ALL-NEW chassis and damper - High-flow main piston - Air seal package - Volume spacers with smaller increments - MCU bottom out bumper - Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster - Independent firm mode circuit – Clockable 2 position adjuster Increased rebound adjuster range (over DPX2) - Optimized reservoir lengths per shock size - Hydraulic top out feature - Reduced damper noise - Larger air sleeve bore reduces average rider pressure by 40 psi vs. DPX2 - Bearing hardware compatible both sides - Air valve location offers improved frame fitment and pump access

The lightweight Kabolt Axle, inspired by Geoff Kabush through the RAD program, is now available for all Fox 15QR forks. The 100mm version is 40g lighter than the standard 15QR (54% weight savings). The Kabolt is compatible with all 15QR forks and installs with a 6mm hex tool. Not compatible with 2021 Fox forks.

THE HARD CHARGING DO IT ALL TRAIL FORK Smoother, lighter, more tunable, and more capable than ever before; when it comes to a do-it-all trail fork the 34 is in a class of its own. 34 is the ultimate trail companion. Featuring an EVOL air spring, choice of dampers, and a lightweight yet robust chassis, you can count on 34 to get up and down the mountain, every time. Our GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes our patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork.

THE DOWN-COUNTRY TRAILBLAZER The lightest 34 ever, the all-new 34 Step-Cast is designed from the ground up to deliver uncompromising XC race performance with class-leading tunability, chassis stiffness, and strength. 34 is the ultimate trail companion. Featuring an EVOL air spring, choice of dampers, and a lightweight yet robust chassis, you can count on 34 to get up and down the mountain, every time. In its fourth generation, our patented FIT4 closed cartridge system provides two on-the-fly compression damping positions—Open and Firm—to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.

THE GOLD STANDARD NOW LIGHTER & MORE COMPACT The proven Transfer Seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. DOES NOT INCLUDE LEVER AND CABLEING ALL FACTORY TRANSFER SEAT POSTS - Routing: Internal Only - Lower Coating: Powdercoat Black - Upper Coating: Kashima Coat SPECS & FAMILY FEATURES - Patent-pending clamp design dramatically reduces stack height - Proven Transfer internals with even easier serviceability than 2020 model - 25g lighter than 2020 Transfer - NEW lightweight under-bar 1x lever design – or existing 2x lever - NEW 200mm drop option - Updated design - Reduced overall length and insertion depth: - 175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction - 150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction - 125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction - 100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reduction

Freshen up your Fox shock. It is a fairly simple service that can greatly improve the performance of an old Fox shock and bring it back to life. This kit includes everything you will need for the service. Fox Float rebuild kit for all Fox Float shocks from 2000 until current model shocks. Includes 2 quad rings Includes 2 O-rings Includes dust wiper Includes travel indicator O-ring Includes 4 back up rings

SMOOTHER STIFFER AND MORE TUNABLE THAN EVER BEFORE With an unmatched combination of smooth performance, tunability, stiffness, and lightweight–we took the award-winning, EWS favourite and made it even better. “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat.

Changing the volume spacers in your fork is an easy internal adjustment that allows you to change the amount of mid-stroke and bottom out resistance. With this you can dial in your Fox Float fork's air volume to suit your riding style.

All standard steel springs are black and are marked with their spring rate in lbs/in (in 50 lb increments) and the total travel of the spring itself. Standard black springs should only be paired with shocks having less travel than the travel marked on the spring itself. Compatible with both Fox and Marzocchi rear shocks The 35 mm/1.385" Internal diameter also fits DVO, MRP and X-Fusion shocks

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvments

The lightest 34 ever, the 34 Step-Cast is designed from the ground up to deliver uncompromising XC race performance with class leading tunability, chassis stiffness and strength. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - Grip SL and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities

THE HARD HITTING LONG-TRAVEL ENDURO SPECIALIST When you need to go really big, reach for the 38. Optimized for 160-180mm of travel and packing the same revolutionary feature set as the 36, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time.