Forks & Suspension

THE DOWN-COUNTRY TRAILBLAZER The lightest 34 ever, the all-new 34 Step-Cast is designed from the ground up to deliver uncompromising XC race performance with class-leading tunability, chassis stiffness, and strength. 34 is the ultimate trail companion. Featuring an EVOL air spring, choice of dampers, and a lightweight yet robust chassis, you can count on 34 to get up and down the mountain, every time. In its fourth generation, our patented FIT4 closed cartridge system provides two on-the-fly compression damping positions—Open and Firm—to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.

SMOOTHER STIFFER AND MORE TUNABLE THAN EVER BEFORE With all-new design inside-and-out, plus an unmatched combination of smooth performance, tunability, stiffness, and lightweight–we took the award-winning, EWS favourite and made it even better. 36 FACTORY GRIP2 FORKS Upper Tube Finish: Kashima Coat Air Channels: Yes Bleeders: Yes Axle Size: 15QR x 110 Floating Axle: Yes Rotor Size: 180 direct Post Mount, Up to 230 compatible Mud Guard Mount: Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment Air Spring: FLOAT EVOL Steerer: 1.5 Taper Starting Weight: 1965 g

SMOOTHER STIFFER AND MORE TUNABLE THAN EVER BEFORE With an unmatched combination of smooth performance, tunability, stiffness, and lightweight–we took the award-winning, EWS favourite and made it even better. “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat.

FOX is now offering decal kits in 11 custom colorways. Kits include fork and shock decals to fit almost every FOX fork and shock model. Specific decals for 32, 34, 36, 38 and 40 forks as well as DPS, FLOAT X, FLOAT X2, DHX and DHX2 shocks. One decal kit can cover more than one fork and shock combo. Images to be added later

Replacement Air shaft Assembly for Changing the Travel within your fork This Assembly is for 2018 Fox 32 in Factory, Performance - Elite For Non Stepcast Forks 26inch and 27.5

FOX 34 Float NA2 Rebuild kit

Replacement Air shaft Assembly for Changing the Travel within your fork This Assembly is for 2019 to 2021 Fox 34 Non-Stepcast forks in Factory, Performance - Elite

FOX 34 Float NA2 Rebuild kit

The Fox 34/36/40 Crush Washer seals the fork lowers and prevents oil from seeping out while simultaneously keeping dirt out. It’s designed to fit Fox 34/36/40 mm stanchion forks and sits on the damper side shaft which extends out from the bottom of the forks. SPECS Compatible with the damper side of 34/36/40 mm fox forks Made from Nylon 13mm x 15mm (inner x outer) diameter Fox part # 241-01-011

Replacement Air shaft Assembly for Changing the Travel wtihin your fork This Assembly is for 2021 Fox 36 in Factory, Performance - Elite

Replacement Air shaft Assembly for Changing the Travel wtihin your fork This Assembly is for 2021 Fox 38

If you want the best, go straight to the source. These are Fox's new Low Friction seal kits — the same seals used on their premium line of "Factory Series" forks. Great hop-up for your older Fox fork, essential for your newer Fox Fork Inspect and clean and/or change every 125 hours of riding use or anually for maximum performance and fork longevity. Select the kit that matches the stanchion tube size of your Fox fork Note* - Seals do not work on older forks with "flanged" style lowers and a seal driver tool is necessary for proper installation.

FOX Service Set: 2017 36 27.5in 180 15x110 QR Fox Matte Black, F-S PE-S, Lower Leg Assy

Fox Fork Mud Guard for 2021+ Single Crown Fox Forks Protect your bike and your face with Fox's new integrated fender. Compatible with 2021+ Fox 36 and 38 forks. Includes all installation hardware.

Changing the volume spacers in your fork is an easy internal adjustment that allows you to change the amount of mid-stroke and bottom out resistance. With this you can dial in your Fox Float fork's air volume to suit your riding style.

Fox Fork Mud Guard for 2021+ Single Crown Fox Forks Protect your bike and your face with Fox's newest full-sized integrated fender. This optional add-on XL Fork Mud Guard keeps the spray out of your face and adds even more protection for your fork’s stanchions and seals. Designed specifically for 2021 and newer FOX 36 and 38 fork models, and built to give you 85% more coverage than the small, this guard mounts directly onto the fork thanks to a proprietary 4-point direct mount system. Compatible with 2021+ Fox 36 and 38 forks. Includes all installation hardware.

Replacement Fox IGUS eyelet bushings for one eyelet. Measures .598OD,.501ID,

The lightweight Kabolt Axle, inspired by Geoff Kabush through the RAD program, is now available for all Fox 15QR forks. The 100mm version is 40g lighter than the standard 15QR (54% weight savings). The Kabolt is compatible with all 15QR forks and installs with a 6mm hex tool. Not compatible with 2021 Fox forks.

Replacement Quick Release Axle assembly, for Fox forks. Two options available 2016 15x100 QR 2016 15x110 QR

Freshen up your Fox shock. It is a fairly simple service that can greatly improve the performance of an old Fox shock and bring it back to life. This kit includes everything you will need for the service. Fox Float rebuild kit for all Fox Float shocks from 2000 until current model shocks. Includes 2 quad rings Includes 2 O-rings Includes dust wiper Includes travel indicator O-ring Includes 4 back up rings

These SLS springs are a lighter weight steel spring option offered in addition to our standard steel springs. The new SLS springs from FOX are lighter than titanium springs at more affordable prices. A proprietary surface treatment and stress relief process removes residual stresses from the spring, allowing them to withstand higher stresses. Each spring is optimized by using a smaller wire diameter and fewer coils, creating a lighter spring. For 2019 FOX has developed a new line of SLS springs to optimize performance on all coil shock platforms including the newer metric and trunnion options. All 2019 SLS springs are Orange and are marked with their spring rate in lbs/in and the total travel of the spring itself in both standard and metric. 2019 SLS springs should only be paired with shocks having less travel than the travel marked on the spring itself. 2.4in/61mm Travel Springs - 7.875inx2.25in, 185mm(T)x50mm, 185mm(T)x52.5mm, 185mm(T)x55mm, 210mmx50mm, 210mmx52.5mm, 210mmx55mm, 230mmx57.5mm 2.65in/67mm Travel Springs - 8.50inx2.50in, 205mm(T)x60mm, 205mm(T)x62.5mm, 205mm(T)x65mm, 230mmx60mm, 230mmx62.5mm, 230mmx65mm 2.9in/74mm Travel Springs - 8.75inx2.75in, 225mm(T)x70mm, 250mmx70mm 3.15in/80mm Travel Springs - 9.50inx3.00in, 225mm(T)x72.5mm, 225mm(T)x75mm, 250mmx72.5mm, 250mmx75mm 3.65in/93mm Travel Springs - 10.5inx3.5in For all Spring Calculations please go to the link below - https://www.ridefox.com/fox17/help.php?m=bike&id=918 WARNING: Modification or alteration of a FOX product can cause product failure resulting in SEVERE INJURY OR DEATH. Never modify or alter ANY part of a FOX product (including coil springs, lower leg cross brace, crown, steerer, upper tubes, lower leg, air can, seat post, air volume spacers, internals, axle slit shims, axle adapters, or any other parts).

Seals and parts for a 2022 Fox Float X air sleeve service. This kit is meant to service your rear shock's air can, not to do a full damper rebuild.

These are shock bearings for Fox suspension. Specifications: Inside Diameter: 0.5" Length: 0.5" Shaft: 0.498"

All standard steel springs are black and are marked with their spring rate in lbs/in (in 50 lb increments) and the total travel of the spring itself. Standard black springs should only be paired with shocks having less travel than the travel marked on the spring itself. Compatible with both Fox and Marzocchi rear shocks The 35 mm/1.385" Internal diameter also fits DVO, MRP and X-Fusion shocks

Fox Suspension Fluid is 5wt, 10wt, 20wt and fully synthetic. Green: Used as a bath oil in all Fox Shox forks. It is also the damper oil you will need for all open bath cartridges. Red: Used solely in the older sealed cartridge forks. Gold: Is intended for 'Fit Damper' forks. 5wt Teflon Infused: Grip and Grip2 Damper-Side Bath. Fox Oil Type and Volume Chart https://www.ridefox.com/fox17/help.php?m=bike&id=1106

Volume Spacer tuning kits for FOX rear suspension service and repair. for 2022+ model year

The Cane Creek Helm MKII Air Suspension Fork features an upgraded damper design for increased support and control and a redesigned air spring that allows for increased air volume for better traction and suppleness. - D-Loc 15mm bolt-on thru-axle

The DB Kitsuma shock was designed to be very intuitive and easy to use for the rider, on and off the trail. It boasts a wider range of damping adjustment on the compression circuit and increased range of rebound control over any other major shock on the market today. - Three Position Climb Switch provides three distinct modes, drastically affecting the shock's feel and character. The new three position climb switch retains the "Descend" and patented "CS" mode, while adding a new "Firm" mode - Tool-Free adjustments are ergonomically designed to be easily accessible and adjustable trail-side—giving riders the power of a pro-tune at their fingertips - The rebound range has been shifted downward for more rebound damping to accommodate the larger spring rates needed for more modern bikes

The fork you need. Genuine replacement parts Get back on the road with a genuine replacement fork. - Original equipment replacement forks for Trek Checkpoint SL bikes - Color matched for direct compatibility

At under 1300g, the 32 Step-Cast is the lightest MTB fork and made for marathon racing. With a sleek reverse arch, this fork also gains 40% stiffness over its predecessor. Available in 100mm travel only - Step-Cast chassis and Reverse Arch Matrix - Redesigned Crown - Genuine Kashima Coating on upper tubes - Grip SL and FLOAT EVOL air spring